GEWES Gelenkwellenwerk Stadtilm supplier in Romania
For GEWES we quote cardan shafts from series 30, 63 and 77, double joints for steered drive axles, crosses and hub flanges; for a quotation we need the series, the installed length, the flange type, the torque and the working angle.
Founded in 1947 · Headquarters: Stadtilm, Germany
Who is GEWES Gelenkwellenwerk Stadtilm and what does it make?
GEWES Gelenkwellenwerk Stadtilm is a German manufacturer of bearing-supported cardan shafts and cross assemblies, with its factory in Stadtilm, in Thuringia, active since 1947. The standard shaft programme covers torques from 350 Nm up to 600,000 Nm and is complemented by very short shafts, flange joints, double joints for steered drive axles, crosses, hub flanges and precision turned parts, including input shafts. The components are made in the same plant, in Germany.
The shafts are numbered by size, from series 15 to series 98. Each series has a defined limit torque, permanent alternating torque, rotation diameter and flange connections. Series 15 has a limit torque of 0.35 kNm, series 30 of 1.1 kNm and a rotation diameter of 90 mm, series 63 of 6.2 kNm, series 77 of 28 kNm, series 90 of 120 kNm, and series 97 and 98 reach 200 kNm. The materials used are quenched and tempered steel and case-hardened steel, and for demanding solutions calibrated precision tubes, which meet the requirements for marine applications and rail vehicles.
The shafts transmit mechanical power in steelworks and paper mills, in crane systems, in material handling, in pumping stations, in rail and marine applications and in the sugar and food industries. Dynamic balancing allows operation with low vibration at high speeds. For correct maintenance, the shaft is identified by series, length, flange type and torques, not by diameter alone.
What do we supply from the GEWES Gelenkwellenwerk Stadtilm range?
| Product | Description |
|---|---|
| Standard cardan shafts (series 15–98) | Bearing-supported shafts for limit torques from 0.35 to 200 kNm, with DIN, SAE and KV/XS flanges, depending on the series. They include very short shafts for tight spaces and are used in machinery, installations, vehicles and marine applications. |
| Double joints for steered drive axles | Double joints with deflection angles of up to 52°, with axis-offset crosses and thin-walled, maintenance-free bushings. They are sized by the permitted peak torque and the real working angle, so they are chosen on the basis of the application data. |
| Crosses, flange joints and hub flanges | Assemblies of crosses and flange joints as spare parts for existing shafts, plus hub flanges. The correct choice depends on the diameter of the cross, its width and the type of shaft connection. |
| Precision turned parts and input shafts | GEWES also makes precision turned parts and input shafts for transmissions, to order, from heat-treated steel. They are made to a drawing or a sample, in small and medium batches. |
Why GEWES Gelenkwellenwerk Stadtilm?
- Series from 15 to 98 — from 0.35 kNm to 200 kNm limit torque, with rotation diameters from 60 to 370 mm
- Standard shafts from 350 Nm up to 600,000 Nm — a range used in steelworks, paper, cranes and pumping stations
- Dynamic balancing of the shafts — low vibration and reduced load on the drive line, at high speeds
- Double joints for steered drive axles — deflection angles of up to 52°, with axis-offset crosses and maintenance-free bushings
- Materials for marine and rail applications — quenched and tempered steel, case-hardened steel and calibrated precision tubes
Which GEWES Gelenkwellenwerk Stadtilm codes and series are requested most often?
| Code | Description |
|---|---|
| Serie 15 | Limit torque 0.35 kNm, rotation diameter 60 mm |
| Serie 30 | Limit torque 1.1 kNm, rotation diameter 90 mm |
| Serie 43 | Limit torque 2.4 kNm, rotation diameter 98 mm |
| Serie 53 | Limit torque 4.2 kNm, rotation diameter 115 mm |
| Serie 63 | Limit torque 6.2 kNm, rotation diameter 125 mm |
| Serie 68 | Limit torque 11.5 kNm, rotation diameter 160 mm |
| Serie 73 | Limit torque 25 kNm, rotation diameter 178 mm |
| Serie 77 | Limit torque 28 kNm, rotation diameter 204 mm |
| Serie 83 | Limit torque 40 kNm, rotation diameter 250 mm |
| Serie 90 | Limit torque 120 kNm, rotation diameter 285 mm |
| Serie 97 | Limit torque 200 kNm, rotation diameter 350 mm |
| Serie 98 | Limit torque 200 kNm, rotation diameter 370 mm |
| Double joints | For steered drive axles, angle up to 52° |
Where is GEWES Gelenkwellenwerk Stadtilm equipment used?
- Steelworks and paper mills — power transmissions in process installations
- Cranes and material handling — transmissions between offset axes
- Pumping stations, sugar and food industry — transmissions in process installations
- Marine and rail applications — materials compliant with marine classification and rail vehicle requirements
- Vehicles and agricultural machinery — cardan shafts and double joints
How do we supply GEWES Gelenkwellenwerk Stadtilm in Romania?
We can quote GEWES cardan shafts, crosses and joints for replacements on existing drive lines, starting from the series and dimensions on the shaft. Common GEWES crosses and shafts can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise they are supplied to order, typically 1–4 weeks. For large shafts or those sized for the application, depending on the specification, the lead time may be longer, confirmed in the quotation. For a correct request we need the shaft series, the installed length, the type and diameter of the flanges, the torque and speed, the working angle and, for a cross, the journal diameter and the width.
Whether a GEWES series can take over from an existing shaft is checked on the basis of the series, the length, the connections and the operating data.
Frequently asked questions about GEWES Gelenkwellenwerk Stadtilm
What does GEWES Gelenkwellenwerk Stadtilm make?
GEWES has made, since 1947 in Stadtilm, bearing-supported cardan shafts and cross assemblies, double joints for steered drive axles, hub flanges and precision turned parts. The standard shafts cover torques between 350 Nm and 600,000 Nm and are used in industrial installations, vehicles, and marine and rail applications.
How do I choose the series of a GEWES cardan shaft?
Start from the transmitted torque, with a margin for shocks, the rotation diameter allowed by the space and the flanges at the ends. Series 30 has 1.1 kNm and 90 mm, series 63 6.2 kNm and 125 mm, series 90 120 kNm and 285 mm. We also need the working angle, the speed and the length.
Do you supply GEWES in Romania and how quickly?
Yes, supplied to order. Common GEWES parts: 24–72 h when the item is in stock, locally or at the supplier; otherwise, to order, typically 1–4 weeks. For large-series shafts or those sized for the application and for special parts, depending on the specification, the lead time may be longer; we confirm it in the quotation after checking the data.
Can I replace an existing cardan shaft with a GEWES model?
It is checked on the data: the series or marking on the shaft, the installed and extended length, the connection type (DIN, SAE or other), the diameter and number of holes, the torque and the speed. Replacement is confirmed on the basis of the data, not only the outside diameter; from these data we check whether a GEWES series can take over the position.
What data should I send for a quotation on a cross or a double joint?
For a cross: the journal diameter, the width and the bearing type, plus the series of the shaft it comes from. For a double joint: the peak torque, the required deflection angle, the axial travel and whether the axle is driven, steered or both. A drawing or a photo is also useful for correct identification.
How do I request a GEWES Gelenkwellenwerk Stadtilm quotation?
Send the GEWES Gelenkwellenwerk Stadtilm code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Gelenkwellenwerk Stadtilm GmbH (manufacturer documentation)

