Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

KMT Waterjet supplier in Romania

For KMT Waterjet we quote ultra-high-pressure pumps STREAMLINE PRO, SL-VI, CLASSIC, NEO and TRILINE, cutting heads AUTOLINE, IDE and AQUALINE and FEEDLINE abrasive metering systems; we need the pump series and the power.

Headquarters: Baxter Springs, USA

Request a quote

Who is KMT Waterjet and what does it make?

KMT Waterjet is a company with offices in Baxter Springs, in the state of Kansas in the USA, and in Bad Nauheim, Germany, which makes ultra-high-pressure pumps and systems for waterjet cutting. The equipment is used for cutting metals, stone, glass and composite materials, with pure water jet or with abrasive.

The pumps are grouped in series by pressure and power. STREAMLINE PRO works at 90,000 psi, approximately 6,200 bar, in the 125, 60 and 50 HP versions. STREAMLINE SL-VI works at 60,000 psi, approximately 4,140 bar, in steps of 15, 50, 100 and 200 HP, with flow rates from 1.14 to 14 l/min at maximum pressure. Alongside them are STREAMLINE CLASSIC at 60,000 psi and 50 HP, NEO at 60,000 psi and 30 and 50 HP, TRILINE at 55,000 psi with direct drive at 30 HP and the ARA pump at 55,000 psi.

For the abrasive jet, the company offers cutting heads, abrasive hoppers and metering units. The AUTOLINE head is self-aligning, so that the focusing tube and the mixing chamber wear evenly, with tool-free orifice change, while IDE with diamond and AQUALINE for water jet without abrasive complete the family. The abrasive is stored in ADS hoppers of 500 and 2,000 lb and in the 500V hopper and is metered with FEEDLINE V or FEEDLINE PRECISION. For complete machines there are complete cutting systems, in X-Y, multi-axis, multi-head, large-format table, combined with saw, robotic and strip configurations. For a quotation, the pump series, motor power, pressure and supply voltage matter.

What do we supply from the KMT Waterjet range?

ProductDescription
STREAMLINE PRO pumps at 90,000 psiUltra-high-pressure pumps of 90,000 psi, approximately 6,200 bar, in the 125, 60 and 50 HP versions, for fast-cutting production. They are used with PRO heads specially sized for that pressure.
STREAMLINE SL-VI, CLASSIC and NEO pumps at 60,000 psiPumps of 60,000 psi, approximately 4,140 bar, SL-VI in steps of 15, 50, 100 and 200 HP, CLASSIC at 50 HP and NEO at 30 and 50 HP. The flow at maximum pressure increases with motor power.
TRILINE and ARA at 55,000 psiTRILINE is a direct-drive pump of 55,000 psi at 30 HP, and ARA is a pump of 55,000 psi. The power of the ARA pump is confirmed on the requested code.
Cutting heads and abrasive meteringAUTOLINE, IDE with diamond and AQUALINE heads, ADS and 500V hoppers and FEEDLINE V and FEEDLINE PRECISION metering units. They are chosen according to the type of cutting, with abrasive or pure water, and the pump pressure.

Why KMT Waterjet?

  • Pumps at 90,000 psi, 60,000 psi and 55,000 psi — the pressure level is chosen according to the material thickness and cutting speed required
  • Long-stroke intensifier, quick-change ceramic plunger and hydraulic seal in a one-piece cartridge — designed for easy maintenance and high uptime
  • AUTOLINE head with automatic alignment and tool-free orifice change — the focusing tube wears evenly
  • FEEDLINE metering units and abrasive hoppers in the same family — the abrasive flow is adjusted directly on the system
  • Complete systems in several machine configurations — the pump, the head and the table can be requested together

Which KMT Waterjet codes and series are requested most often?

CodeDescription
STREAMLINE PROPump of 90,000 psi, 125, 60 and 50 HP versions
STREAMLINE SL-VIPump of 60,000 psi, steps of 15, 50, 100 and 200 HP
STREAMLINE CLASSICPump of 60,000 psi, 50 HP
NEOPump of 60,000 psi, 30 and 50 HP
TRILINEDirect-drive pump of 55,000 psi, 30 HP
ARAPump of 55,000 psi
AUTOLINESelf-aligning abrasive cutting head
IDEDiamond cutting head
AQUALINEPure water cutting head
ADSAbrasive hopper of 500 and 2,000 lb
500VAbrasive hopper with metering
FEEDLINE VAbrasive metering unit
FEEDLINE PRECISIONPrecision abrasive metering unit

Where is KMT Waterjet equipment used?

  • Metalworking — cutting stainless steel, aluminium and titanium with abrasive jet
  • Stone, marble, granite and glass — cutting with water jet
  • Titanium and composite materials — cutting with abrasive jet
  • Thick parts — cutting cast steel with abrasive jet
  • Complete systems — machines with several cutting heads

How do we supply KMT Waterjet in Romania?

We can quote KMT Waterjet ultra-high-pressure pumps, cutting heads, abrasive hoppers and metering units, wear parts and components for existing systems. For an accurate quotation, send the pump series, for example STREAMLINE SL-VI or PRO, the motor power, the working pressure, the voltage and the number of operating hours, and for parts the name or the number from the pump parts list. If you are replacing a cutting head, the type of orifice and focusing tube helps. KMT Waterjet pumps, heads and parts are supplied to order, usually in 1–4 weeks; for complete pumps the lead time may be longer, and the exact date is in the quotation.

For wear parts of ultra-high-pressure pumps we check the pump series and year before the quotation, because parts differ between generations.

Frequently asked questions about KMT Waterjet

What ultra-high-pressure pumps does KMT Waterjet have, from STREAMLINE PRO and SL-VI to NEO and TRILINE?

KMT Waterjet makes ultra-high-pressure pumps of 55,000, 60,000 and 90,000 psi, cutting heads with abrasive and with pure water, abrasive hoppers and metering units and complete waterjet cutting systems in several machine configurations.

How do I choose between a 60,000 and a 90,000 psi pump?

The pressure of 90,000 psi, approximately 6,200 bar, is used on STREAMLINE PRO for fast-cutting production, and 60,000 psi, approximately 4,140 bar, on SL-VI, CLASSIC and NEO. Send us the thickness, the material and the number of heads; we check the series.

Can I replace a worn cutting head?

Yes, if the pump series and the head type are known, for example AUTOLINE, IDE or AQUALINE. Send us the working pressure, the orifice and focusing tube diameter, plus a photo of the head; we confirm the suitable variant in the quotation.

Do you supply KMT Waterjet in Romania, and how quickly?

KMT Waterjet pumps and parts are ordered, usually in 1–4 weeks, and wear parts can ship in 24–72 h when the item is in stock, locally or at the supplier. For complete pumps and complete systems the lead time may be longer.

What do I send for a quotation on a STREAMLINE SL-VI pump?

The power required, 15, 50, 100 or 200 HP, the supply voltage, the working pressure, the number of cutting heads to be fed and the available cooling medium. With these data we determine the variant in the SL-VI series and include it in the quotation.

How do I request a KMT Waterjet quotation?

Send the KMT Waterjet code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: KMT Waterjet Systems (manufacturer documentation)