Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Lewa supplier in Romania

Diaphragm pumps for precise dosing

Founded in 1952 · Headquarters: Leonberg, Germany

Request a quote

Who is Lewa and what does it make?

LEWA was founded in 1952 in Leonberg, near Stuttgart, and specialises in metering and process pumps, mainly with hydraulically actuated diaphragms, for metering and process pumping applications at pressures of up to 1,200 bar (ecoflow series).

The ecoflow series covers flow rates from 4 l/h up to 114,000 l/h, pressures of up to 1,200 bar and temperatures of up to 400 °C, depending on the model; it is used for metering and process pumping in the chemical industry, water treatment and food processing. The ecodos series is the mechanically actuated diaphragm metering pump for the low-pressure range: it covers flow rates from 0.4 l/h up to 9,000 l/h, up to 20 bar, and a sanitary/hygienic version is aimed at food and pharmaceutical production. At the other end of the spectrum, process diaphragm pumps (ecoflow LDG and LDH, triplex) cover higher flow rates and pressures, up to 1,200 bar.

The DPS (Diaphragm Protection System) diaphragm protection system, patented by LEWA and available depending on the model, prevents contamination of the process fluid by the hydraulic drive oil even in the event of a failure, an essential technical detail where incorrect dosing or product contamination are not acceptable.

What do we supply from the Lewa range?

ProductDescription
ecoflow Series Diaphragm Metering PumpsHydraulically actuated diaphragm metering pumps, for precise dosing of chemicals in water treatment, the chemical industry and food processing. Flow rates from 4 l/h up to 114,000 l/h and pressures of up to 1,200 bar, depending on the model and the pump head. Double diaphragm with a rupture monitoring sensor, which completely separates the hydraulic drive oil from the process fluid and signals any fault immediately, preventing contamination. Flow adjustment and control options are confirmed from the manufacturer's documentation.
ecodos Series Mechanical Diaphragm Metering PumpsMechanically actuated diaphragm metering pump, for the low-pressure range. Flow rates are from 0.4 l/h up to 9,000 l/h, maximum pressure is 20 bar, maximum temperature 80 °C and maximum viscosity 500 mPa·s. The multiplexing function allows low-pulsation pumping, recipe dosing and blending. The ecodos sanitary/hygienic version has surfaces suited to the requirements of food and pharmaceutical production. The metering head and contact materials are chosen according to the fluid dosed.
ecoflow LDG/LDH Series Diaphragm Process PumpsDiaphragm pumps for process applications with high pressure requirements. The ecoflow process pump reaches flow rates of up to 19 m³/h per pump head and pressures of up to 1,200 bar; the triplex series, in a compact monobloc construction, has the same maximum pressure. Exact values depend on the model and are confirmed from the manufacturer's documentation. Contact materials selected according to chemical compatibility with the injected process fluid.
Complete Metering Systems and SkidsComplete metering packages, integrating the LEWA pump, the chemical storage tanks, the process instrumentation (level, pressure and flow sensors) and the control system, mounted on a single frame for fast on-site installation. Configured for the specific application — disinfection, pH correction, dosing of polymers or process additives — with pump redundancy available for critical applications where interruption of dosing is not acceptable. The configuration, instrumentation and any factory tests are set according to the application and confirmed in the manufacturer's documentation.

Why Lewa?

  • Specialisation in metering and process pumps — over seven decades of experience in precision metering
  • High pressures — up to 1,200 bar on the ecoflow series, depending on the model
  • DPS diaphragm protection system — prevents contamination of the process fluid in the event of a failure
  • Precision metering — metering pumps for laboratory and industrial applications
  • Wide range of metering and process pumps — flow rates depend on the series and the model
  • Process pumps — ecoflow and triplex, for high-pressure process applications

Which Lewa codes and series are requested most often?

CodeDescription
ecoflow LDH BoxerHydraulic diaphragm metering pump, high capacity
MAH / MBHSolenoid-driven diaphragm micro-metering pumps, for very small quantities (MAH, MBH and MLM series)
MLMSeries of diaphragm micro-metering pumps, alongside MAH and MBH
ecoflow LDGHydraulic diaphragm process pump
Triplex G3ETriplex process pump in monobloc construction, small size in the triplex range
ecosmart LCADiaphragm metering pump from the ecosmart range, with manual stroke adjustment
ecoflowModular family of diaphragm metering and process pumps, up to 1,200 bar
ecoSmartFamily of diaphragm metering pumps for low and medium pressures and small flow rates (up to 80 bar, 300 l/h)
ecodosMechanically actuated diaphragm metering pump, for low pressure (up to 20 bar)
TriplexDiaphragm process pump, in compact monobloc construction
FC Laboratory PumpMicro-metering pump for laboratories and test centres
Micro-Metering Pump MMicro metering pump for high precision

Where is Lewa equipment used?

  • Chemical and petrochemical industry — precise dosing of additives and reagents
  • Drinking water and wastewater treatment — disinfection and pH correction
  • Oil and gas — chemical dosing
  • Food and beverage industry — dosing of ingredients and additives
  • Pharmaceutical industry — precision dosing in sterile processes
  • Energy — metering and process pumping in power installations
  • Paints, inks and adhesives — dosing of recipe components

How do we supply Lewa in Romania?

LEWA diaphragm metering pumps from the ecoflow and ecodos ranges are supplied through EU supply channels; we start from the manufacturer's technical documentation for each metering head. As these are precision equipment configured for the application, the lead time to order is typically 1–4 weeks; for replacement diaphragms and valves for units already installed, the guideline is 24–72 h when the item is in stock, locally or at the supplier. For sizing the metering head, we need the chemical dosed, the flow rate required and the discharge pressure of your process.

LEWA availability for special metering heads at pressures above 1,200 bar is checked on request; warranty work on installed pumps is outside our offer.

Frequently asked questions about Lewa

Which LEWA pump should I choose for high-precision dosing at low flow rates?

For very small quantities, LEWA has the solenoid-driven micro-metering pump series MAH, MBH and MLM, and for laboratories and test centres the FC series (up to 400 bar in the diaphragm version). The choice depends on the minimum and maximum flow rate the application requires.

What is the difference between LEWA ecoflow and ecosmart pumps?

ecoflow is the modular system of metering and process pumps, with high flow rates and pressures of up to 1,200 bar. ecosmart is the range for low and medium pressures and small flow rates (up to 80 bar and 300 l/h), suited to simpler applications.

Do you supply LEWA metering pumps in Romania?

Yes, we supply LEWA pumps to order, based on the manufacturer's technical documentation; availability is confirmed in the quotation. The lead time to order is typically 1–4 weeks, depending on the model and the metering head chosen. We recommend confirming the exact series before ordering.

What information should I send for a LEWA pump quotation?

It helps to specify the substance dosed, the flow rate required, the back pressure in the installation and the desired material for the metering head. These details allow the right choice between the ecoflow, ecosmart or Triplex families in the LEWA range.

What is the LEWA Triplex G3E process pump?

It is a small size from the LEWA triplex process pump range, in compact monobloc construction, for low-pulsation dosing where installation space is limited. The exact data (flow rate, pressure) are confirmed from the manufacturer's documentation.

How do I request a Lewa quotation?

Send the Lewa code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: LEWA (manufacturer documentation)