KSB supplier in Romania
For KSB we offer Etanorm standardised centrifugal pumps, Multitec and Movitec multistage pumps, Sewatec sewage pumps and Omega axially split casing pumps; from the code on the nameplate we identify the series and size.
Founded in 1871 · Headquarters: Frankenthal, Germany
Who is KSB and what does it make?
KSB is one of the "veterans" of the pump industry — a company founded in 1871, so it has over 150 years of experience. The company has been through the Industrial Revolution, two world wars, the transition to automation, and now Industry 4.0, becoming a global manufacturer of industrial pumps and valves.
KSB focuses on heavy-duty and critical applications. If you have a pump that has to handle concentrated sulphuric acid at 120°C, or superheated hot water in nuclear plants, or abrasive slurry in mining — consider KSB.
Their flagship products are the Etanorm series (standardised centrifugal pumps according to DIN 24255/EN 733) and the Sewatec series (for sewage and wastewater treatment). Etanorm complies with DIN 24255/EN 733, and the mounting dimensions are also adopted by other makers of similar pumps.
Another strength of KSB is its experience in industrial valves. They do not only make pumps — they also make butterfly valves, ball valves, gate valves and control valves, all for industrial applications. For a complex project in petrochemicals or energy, you can equip the whole system with KSB: pumps + valves + control systems, all from the KSB portfolio. This greatly simplifies maintenance and compatibility.
What do we supply from the KSB range?
| Product | Description |
|---|---|
| Etanorm (standardised centrifugal pumps) | The Etanorm series is a range of single-stage volute centrifugal pumps, in back pull-out construction, with main parameters and dimensions according to EN 733, closed radial impellers and replaceable wear rings on the casing, with single or double mechanical seal according to EN 12756. Typical applications: chemical processes, boiler feed, cooling systems, petroleum product transfer, pharmaceutical industry. Standardisation according to EN 733 sets the main dimensions of this type of pump. |
| Sewatec (volute pumps for sewage) | The Sewatec series is a volute pump for horizontal or vertical installation, with various new-generation impeller types and a discharge flange according to DIN and ANSI, intended for wastewater and sludge; explosion-proof variants also exist. |
| Multitec (multistage pumps for high pressures) | The Multitec series is a horizontal or vertical multistage centrifugal pump, in ring-section construction, with cast radial impellers and axial or radial suction. |
| Omega (axially split volute pumps) | The Omega series is a single-stage pump with axially split volute and a double-entry radial impeller, for horizontal or vertical installation. |
Why KSB?
- Over 150 years of experience in the pump industry — know-how built up in thousands of critical applications around the globe
- Etanorm series: centrifugal pumps with main parameters and dimensions according to EN 733
- Specialisation in extreme applications: petrochemicals, nuclear power plants, mining, offshore — where reliability cannot be compromised
- The range includes pumps + valves + control systems
- High chemical resistance: special materials (Alloy C, Hastelloy, Duplex) for aggressive fluids
- Presence in over 150 countries
Which KSB codes and series are requested most often?
| Code | Description |
|---|---|
| Etanorm | Single-stage volute pump, back pull-out construction |
| Etaline | Single-stage volute pump in in-line construction, with pump and motor shafts rigidly coupled |
| Etabloc | Close-coupled pump with integrated frequency inverter |
| Etachrom | Horizontal single-stage pump with circular casing, with main parameters and dimensions according to EN 733 |
| Movitec | Multistage pump in ring-section construction for high pressure |
| Amarex | Vertical submersible pump for wet installation |
| Sewatec | Volute pump for sewage applications |
| Omega | Axially split volute pump, double-entry impeller |
| Multitec | Multistage pump in ring-section construction, horizontal or vertical installation |
| Amaline | Horizontal propeller pump with submersible motor |
| CPK/CPKN | Radially split volute pump, back pull-out construction |
| MegaCPK | Extended version of the CPK, additional capacity and materials |
| BOA | Straight-pattern valve for HVAC installations |
| BOAX | Butterfly valve with centred disc, elastomer sleeve seal |
| DANAIS | Double-eccentric butterfly valve for industrial applications |
| ISORIA | Butterfly valve with centred disc, several body configurations |
| NORI | Industrial straight-pattern gate valves, check valves and suction strainers |
| ECOLINE | Ball valves and gate valves to ANSI/ASME standard |
Where is KSB equipment used?
- Petrochemicals and Refineries (pumps for crude, petroleum products, chemicals)
- Energy (thermal, nuclear, hydroelectric, offshore wind plants)
- Public Utilities (water supply, sewerage, treatment plants)
- Mining and Metals (abrasive slurry pumping, drainage systems)
- Chemical Industry (transfer of acids, bases, solvents, polymers)
- Food Industry (transfer of viscous products, CIP processes)
- Shipbuilding and Offshore (ballast, cooling, fuel transfer systems)
- Pulp and Paper Industry (transfer of paper pulp, chemicals)
- Industrial HVAC (district heating, large air conditioning systems)
- Agriculture (large-area irrigation, land drainage)
How do we supply KSB in Romania?
We bring KSB products to Romania through EU supply channels. We confirm exact availability before setting a lead time. For standard parts from the Etanorm family, we can sometimes offer 24–72 h when the item is in stock, locally or at the supplier; otherwise, we typically estimate 1–4 weeks to order for specially made pumps or valves. For a correct calculation, send us the flow, the pressure, the fluid temperature and the material wanted for the pump casing. We help with initial sizing and order tracking, and specific software configurations are set from the project data before the quotation.
For KSB automation, software configurations and material tests are set from the project data; warranty-period service is outside our offer.
Frequently asked questions about KSB
What do the letters in a KSB pump code mean, for example Etanorm G?
The base name shows the design family, and the suffixes indicate the variant: casing material, seal type or back pull-out mounting. For complete identification we always check the designation printed on the pump nameplate together with the data sheet published by KSB, not just the final letter.
Does KSB supply to Romania to order?
We supply pumps and valves from the Etanorm, Sewatec, Amarex or Multitec ranges to order, based on the code confirmed by the customer. We refer to the manufacturer's technical documentation, and the lead time to order is typically 1–4 weeks. Sending the exact code from the existing pump is useful for finding a compatible variant.
What should I specify for a quotation on a KSB pump?
You need to give the full model designation, the flow and head required, the temperature and type of liquid pumped, plus the construction material wanted. A photo of the nameplate of the existing pump makes identification much quicker, especially when the equipment is older and the original code is no longer fully legible.
What is the difference between KSB Etanorm and Etaline?
Etanorm is a single-stage pump in back pull-out construction, mounted on a separate baseplate, suitable for most general industrial applications. Etaline has an in-line construction, with suction and discharge connections on the same axis, which reduces installation space in boiler rooms or compact stations. The choice depends on the pipework configuration and the space available in the installation.
How do I find an equivalent KSB valve for an older installation?
We compare the nominal diameter, working pressure and seal type with the current BOA, BOAX or ISORIA ranges in the technical documentation. A dimensioned drawing of the flanges and a description of the medium handled help greatly with correct matching. Final confirmation is made after checking the real parameters of the pipeline, not just the general appearance of the existing valve.
How do I request a KSB quotation?
Send the KSB code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: KSB, KSB SE & Co. KGaA (manufacturer documentation)

