Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Linn-Pumpen supplier in Romania

For Linn-Pumpen we quote gear pumps in the F, D, FLM and E/F series, plus magnetic-coupling variants; for a quotation we need the liquid, the viscosity, the flow rate and the pressure.

Headquarters: Schalksmühle, Germany

Request a quote

Who is Linn-Pumpen and what does it make?

Linn-Pumpen is a German company from Schalksmühle that has made external gear pumps since the 1960s; design and production are carried out at its headquarters. The pumps are supplied as flange pumps with a free shaft end, as ready-to-run motor-pump units, in a stainless steel version and in a version with a magnetic coupling, with no dynamic shaft seal.

The F and D series of flange pumps have flow rates between 0.6 and 124 l/min and cover viscosities between 1.4 and 20,000 mm²/s. The FLM, FKM, FOM and FAM electric units range from 0.12 to 18.5 kW, and the stainless steel E/F ones, sometimes with PEEK (polyetheretherketone) gears, reach 24 l/min and 2,500 mm²/s. DB series pressure relief valves are mounted in-line, and a bypass valve is integrated in the pump cover, for short pressure surges.

The maximum permitted pressure depends on the size and the model and can be 10, 50, 70 or 100 bar; on a motor-pump unit, the power of the chosen motor in turn limits the pressure, so the pump is sized for a duty point. For oils, thermal fluids and other media that lubricate well the standard design is chosen, and for solvents and chemicals with low lubricating power PEEK gears are used; the FOM-MG version, with a magnetic coupling, completely eliminates the dynamic shaft seal. Depending on the model, the pumps operate roughly between −40 °C and +200 °C.

What do we supply from the Linn-Pumpen range?

ProductDescription
F and D gear pumps and electric unitsFlange pumps with a free shaft, 0.6–124 l/min, for liquids with a viscosity between 1.4 and 20,000 mm²/s, plus FLM, FKM, FOM and FAM motor-pump units of 0.12–18.5 kW. The stainless steel E/F series, with optional PEEK gears, has 1.15–24 l/min.
Designs and equipment codesBesides FLM, FKM, FOM and FAM, the pump code shows the equipment: the suffix i means an integrated frequency inverter, the prefix G a gear motor, the letter U a pressure relief valve, and MG a magnetic coupling in the FOM design. An example is E/FLMi 328, a stainless steel pump in the FLM design, with an integrated motor and inverter, size 328.
Materials and sealsThe standard design has an EN-GJL-250 housing, with shafts and gears made of 16MnCr5; a special version is made of GGG40 ductile iron. The stainless steel version uses 1.4571 steel, with PEEK gears for solvents. The seal can be NBR (up to 60 °C), FPM or FKM (up to 150 °C), PTFE (up to 200 °C) or a mechanical seal.
DB valves and bypass valveThe DB series valves continuously limit the pressure in the circuit, and a bypass valve integrated in the pump cover takes up short pressure surges. The maximum permitted pressure is 10, 50, 70 or 100 bar, depending on the size and the model.

Why Linn-Pumpen?

  • Gear pumps with viscosities from 1.4 to 20,000 mm²/s — lubricating oil, thermal oil, viscous liquids and metering with a stable flow rate
  • Magnetic-coupling version — no dynamic shaft seal, so no leak point at the shaft seal, for sensitive liquids
  • E/F stainless steel motor-pump units — optional PEEK gears, for small flow rates of 1.15–24 l/min
  • Wide temperature range — depending on the model, roughly between −40 °C and +200 °C, with the seal chosen by fluid
  • Sizing by duty point — each pump with a motor is chosen for the actual pressure and flow rate, not for the maximum value of the series

Which Linn-Pumpen codes and series are requested most often?

CodeDescription
Series FGear pump with a flange and a free shaft
Series DGear pump with a flange and a free shaft, 0.6–124 l/min
FLMElectric gear motor-pump unit
FKMElectric gear motor-pump unit
E/FStainless steel gear pump, optional PEEK gears
DBPressure relief valve for the circuit
FOMElectric gear motor-pump unit, FOM design
FAMElectric gear motor-pump unit, FAM design
E/FLMStainless steel electric motor-pump unit, optional PEEK gears
FOM-MGMotor-pump unit with a magnetic coupling, no dynamic shaft seal

Where is Linn-Pumpen equipment used?

  • Plants with viscous fluids — transfer with a uniform flow rate and stable pressure, at viscosities from 1.4 to 20,000 mm²/s
  • Machine and plant building — gear pumps for lubrication circuits and oil transfer
  • Chemicals and processes — stainless steel gear pumps, with a magnetic coupling for sensitive liquids
  • Thermal oil circuits — pumps for heat transfer fluids, within the temperature range of the chosen model
  • Machines with compact drives — ready-to-run motor-pump units, with a 0.12–18.5 kW motor

How do we supply Linn-Pumpen in Romania?

We can quote Linn-Pumpen gear pumps: flange pumps, motor-pump units, stainless steel variants and magnetic-coupling variants. They are supplied to order, usually in 1–4 weeks; magnetic-coupling variants, special materials or unusual motor drives take longer, and the lead time is given in the quotation. For checking and quoting, we find useful the liquid and its viscosity, the temperature, the flow rate and the pressure, the supply voltage and the type of motor wanted.

Recommending a pump requires the liquid, the viscosity, the temperature, the flow rate and the pressure.

Frequently asked questions about Linn-Pumpen

What does Linn-Pumpen make?

Linn-Pumpen makes, in Schalksmühle, external gear pumps, as flange pumps and motor-pump units, in stainless steel or with a magnetic coupling. Flange pumps are chosen for mounting in an existing machine, and motor-pump units for ready-to-run delivery. The company has worked since the 1960s for industry, machine building and plant building.

How do I choose between a flange pump and a motor-pump unit?

The flange pump with a free shaft end is chosen when it is integrated into an existing machine, and the motor-pump unit when it has to be delivered ready to run. For adjustment there is the version with an integrated frequency inverter, and for very viscous liquids the one with a gear motor. Send us the liquid, the viscosity, the flow rate and the pressure so we can check the type.

Do you supply Linn-Pumpen pumps in Romania, and within what lead time?

Yes, Linn pumps are supplied to order, usually in 1–4 weeks. For magnetic-coupling variants, special materials or unusual motor drives the lead time can be longer, and the exact date is confirmed in the quotation, after the series and the variant have been identified.

I have an old gear pump on a machine; what data should I send for a replacement?

Send the manufacturer and the model, the pump's nameplate or datasheet, the liquid pumped, the flow rate, the pressure, the speed, the connections, the motor voltage and power, plus photos of the installation; tell us also whether the liquid contains particles. Compatibility with the installation is checked before the quotation; equivalence is assessed from the data, not from the designation.

What should I send for a quotation on a gear pump with a magnetic coupling?

State the liquid, the viscosity at working temperature, the pressure, the flow rate, the type of motor and the voltage, the material required (stainless steel or cast iron) and whether the liquid contains particles. With these data we choose between the series and confirm whether the version without a dynamic seal fits.

How do I request a Linn-Pumpen quotation?

Send the Linn-Pumpen code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Linn-Pumpen (manufacturer documentation)