Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

M Pumps supplier in Romania

ISO and API 685 magnetic drive centrifugal pumps for chemical and petrochemical use

Headquarters: Corbola, Italy

Request a quote

Who is M Pumps and what does it make?

M Pumps is an Italian company from Corbola, run by the same family for over 40 years, that makes magnetic drive and mechanical seal centrifugal pumps for the chemical, petrochemical and energy industries. The range includes single-stage and multistage pumps, in the API 610 OH1, OH2, OH3, OH5, BB5 and VS4 design configurations, made of metal or of non-metallic materials with PFA lining, plus positive displacement pumps.

The technical argument for the magnetic drive is the absence of a dynamic seal on the shaft: the liquid stays enclosed in a sealed casing, with no leaks to atmosphere and no seal flush system. The CN MAG-M series complies with ISO 5199 and ISO 15783, operates from −120 °C to +350 °C, and has flow rates up to 4,000 m³/h and heads up to 220 m. The CN MAG-M API version follows API 685 in the OH2 configuration and reaches heads of 370 m, and the quick-exchange RWP cartridge shortens maintenance interventions.

Magnetic drive pumps are used in refineries and petrochemicals, in chemical transfer and in electrolysers for green hydrogen. The selection starts from the liquid, temperature, viscosity and the presence of solid particles, because these determine the casing material, the containment shell and the bearings. The sectors served include oil and gas, chemicals, hydrocarbon processing, green hydrogen, refrigeration, power utilities, water and wastewater, process heating, and cleaning products and detergents. The standards applied are API 610, API 685, ISO 5199, ISO 15783 and ANSI B73.3.

What do we supply from the M Pumps range?

ProductDescription
CN MAG-MMagnetic drive centrifugal pump, ISO 5199 / ISO 15783, OH1 configuration with a compact close-coupled motor. Flow rate up to 4,000 m³/h, head up to 220 m, design pressure PN25, in metal construction.
CN MAG-M APIThe API 685 compliant version (OH2), with a CF8M casing or other alloys, head up to 370 m and design pressure ANSI 300. A mechanical seal version, CN SEAL-M API, is also available.
CL, CI and CM MAG-M seriesOther magnetic drive centrifugal pump series, in ISO or ANSI standard: CL MAG-M (PFA-lined), CL MAG-M ANSI, CI MAG-M and CM MAG-M (these in metal). The exact parameters of each series are checked by code, before the quotation.
C MAG-PL and CM MAG-PMagnetic drive series for non-metallic versions, with PFA lining or made of PP/PVDF plastic, intended for highly corrosive liquids that metal cannot withstand.

Why M Pumps?

  • Synchronous magnetic drive, with no mechanical seal — no leaks to atmosphere with flammable or toxic liquids
  • Temperature range from −120 °C to +350 °C on the CN MAG-M series, with no external cooling of the coupling for hot fluids
  • API 685 version (CN MAG-M API, OH2) with heads up to 370 m — for refinery and petrochemical services
  • Quick-exchange RWP cartridge and bearings of silicon carbide or special carbon — shorter maintenance, without special tools
  • A variety of materials on the same series: standard CF8M, Hastelloy C276, Incoloy 825, duplex or titanium, for aggressive liquids

Which M Pumps codes and series are requested most often?

CodeDescription
CN MAG-MMagnetic drive, ISO 5199 / ISO 15783, OH1
CN MAG-M ANSICN MAG-M version with ANSI dimensions
CN MAG-M APIMagnetic drive per API 685, OH2
CN MAG-MVVersion of the CN MAG-M series
CNV MAG-MVersion of the CN MAG-M series
CL MAG-MMagnetic drive pump, ISO series
CL MAG-M ANSIMagnetic drive pump, ANSI series
CI MAG-MMagnetic drive pump, CI series
CM MAG-MMagnetic drive pump, CM series
C MAG-PLMagnetic drive pump, non-metallic version
CM MAG-PMagnetic drive pump, non-metallic version
CN SEAL-MMechanical seal pump, ISO 5199 / ISO 15783
CL SEAL-MMechanical seal pump, ISO series
CN SEAL-M APIMechanical seal pump compliant with API
CPE MAG-M APIMagnetic drive pump compliant with API 685

Where is M Pumps equipment used?

  • Oil and gas, refineries — transfer of light and heavy hydrocarbons without a dynamic seal
  • Chemical industry — acids, bases and solvents in pumps made of special alloys or PFA
  • Green hydrogen — electrolyte circuits in electrolysers, where contamination is not allowed
  • Power utilities and water treatment — pumps for process circuits
  • Refrigeration and process heating — fluid circuits over a wide temperature range

How do we supply M Pumps in Romania?

We can quote M Pumps magnetic drive or mechanical seal pumps, plus cartridges and spare parts, based on your process data. We supply to order, usually in 1–4 weeks for items; pumps configured by material and by standard (ISO, ANSI or API) may need longer. For an accurate quotation, send us the pump type and series, the liquid with its temperature and viscosity, the flow rate and head, the solids content and the standard required. The exact lead time is confirmed in the quotation.

Replacing an existing pump of another make with an M Pumps pump is established on the basis of the mounting dimensions and the process data.

Frequently asked questions about M Pumps

What products does M Pumps make?

M Pumps, from Corbola (Italy), makes magnetic drive or mechanical seal centrifugal pumps, in metal or in non-metallic materials with PFA lining, plus positive displacement pumps. The standards used include API 610, API 685, ISO 5199, ISO 15783 and ANSI B73.3.

How do I choose between a magnetic drive and a mechanical seal?

The magnetic drive eliminates the dynamic seal and its flush system, so it suits toxic or flammable liquids, where a leak cannot be accepted; the mechanical seal remains an alternative for other services. Tell us the liquid, the temperature and the particle content so we can check the suitable version.

Do you supply M Pumps pumps in Romania, and how quickly?

Yes. M Pumps pumps are supplied to order; for items the lead time is usually 1–4 weeks, and configured pumps (material, standard, containment shell) may need longer, which we confirm in the quotation.

Can I replace an API pump with a CN MAG-M API?

It depends on the data required by the installation specification: the OH2 configuration, the foundation dimensions, the design pressure (ANSI 300 for CN MAG-M API) and the material. Send the datasheet of the existing pump; equivalence is confirmed after checking.

What do I need to send for a quotation for a magnetic drive pump?

The liquid and its density, the minimum and maximum temperature, the viscosity, the solids content, the flow rate, the head, the standard (ISO, ANSI or API) and, for a replacement, the type and series from the nameplate. With these we check the material of the containment shell and of the bearings.

How do I request a M Pumps quotation?

Send the M Pumps code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: M Pumps (manufacturer documentation)