Miksan supplier in Romania
For Miksan we quote VP, VPM and VPC screw pumps for machine tool coolant, open impeller pumps of the AP, BP, CP and EP series, CP EX and EP EX explosion-proof pumps, three-phase and explosion-proof electric motors and vibrator motors; the item is identified by series and nameplate.
Founded in 1977 · Headquarters: Istanbul, Turkey
Who is Miksan and what does it make?
Miksan Motor is a Turkish manufacturer of electric motors and pumps, founded in Istanbul in 1977 to make electric motors. Since 1982 it has also made immersion pumps for machine tools. The current range includes electric motors, explosion-proof motors, vibrator motors, screw pumps and a wide range of centrifugal pumps.
For machine tools, the VP series of screw pumps matters. The pumps deliver high pressure, up to 100 bar, at low flow, up to 200 l/min, and are used mainly for deep hole drilling on CNC machine tools, where the coolant must be pushed through the tool to cool the workpiece and remove chips. They are self-priming pumps with almost no pulsation. The designation tells what is supplied: VP is the pump alone, VPM is the pump with motor, and VPC is the complete assembly, with motor, pressure control valve, pressure gauge and tank cover. The pumped fluid must have lubricating properties, for example an emulsion with at least 5% oil or cutting oil.
Centrifugal pumps are divided by impeller type: open impeller (AP, BP, CP, EP, GP, IP, J), closed impeller (H), peripheral impeller (FP), plastic (DP, PPH), self-priming and in-line (T, KEP, LP), vortex and explosion-proof (CP EX, EP EX). The motors include three-phase versions with 2 and 4 poles, single-phase, explosion-proof and special motors for hydraulic power units. For a quotation, the series, the pressure, the flow rate and the fluid matter.
What do we supply from the Miksan range?
| Product | Description |
|---|---|
| VP, VPM and VPC screw pumps | Pressure up to 100 bar at flow up to 200 l/min, for coolant and lubrication on CNC machine tools and hydraulic systems. VP is the pump alone, VPM the pump with motor, VPC the complete assembly with control valve and pressure gauge. |
| Open and closed impeller centrifugal pumps | The AP, BP, CP, EP, GP, IP and J series have an open impeller, while the H series has a closed impeller. For explosion hazard zones there are the CP EX and EP EX explosion-proof versions, and the DP and PPH series are plastic pumps. |
| Peripheral, self-priming, in-line and vortex pumps | The FP, T, KEP and LP series cover peripheral, self-priming and in-line pumps. Vortex pumps and wide-channel pumps are used for fluids with impurities; there are also pumps with an axial impeller and a cutter. |
| Electric motors, explosion-proof motors and vibrator motors | Three-phase motors with 2 poles (3000 rpm) and 4 poles (1500 rpm), single-phase, three-phase and single-phase explosion-proof motors and special motors. The vibrator motors are three-phase, single-phase, flanged and micro, and the range has received the new VZ series. |
Why Miksan?
- VP, VPM and VPC screw pumps — pressure up to 100 bar for through-tool cooling in deep hole drilling, in three supply versions
- Self-priming pumps with almost no pulsation — constant supply to the tool does not depend on manual priming
- Centrifugal pumps with open, closed, peripheral, vortex and plastic impellers — the impeller type is chosen by the pumped fluid, not only by flow rate
- Explosion-proof versions for pumps (CP EX, EP EX) and for motors — for explosion hazard zones
- Special motors for hydraulic power units and three-phase, single-phase, flanged and micro vibrator motors — useful when the standard series does not fit the machine
Which Miksan codes and series are requested most often?
| Code | Description |
|---|---|
| VP | Screw pump, pump only, without motor |
| VPM | Screw pump together with the motor |
| VPC | Complete screw pump assembly with motor, control valve, pressure gauge and tank cover |
| AP / BP | Open impeller centrifugal pumps |
| CP | Open impeller centrifugal pump, with CP EX explosion-proof version |
| EP | Open impeller centrifugal pump, with EP EX explosion-proof version |
| H | Series of closed impeller centrifugal pumps |
| FP | Series of peripheral pumps |
| DP | Series of plastic pumps |
| KEP | Series of self-priming and in-line pumps |
| VZ | New series of vibrator motors |
| CP EX | Explosion-proof open impeller pump |
Where is Miksan equipment used?
- CNC machine tools — coolant and lubrication for deep hole drilling and machining
- Hydraulic systems — pumping of high-viscosity fluids and units with special motors
- General industry — pumping with open, closed or plastic impeller centrifugal pumps
- Explosion hazard zones — explosion-proof motors and pumps
- Equipment with special motors — shaft and flange specially designed for the machine
How do we supply Miksan in Romania?
We can quote Miksan screw and centrifugal pumps, electric motors, explosion-proof motors and vibrator motors, as well as replacements for units in service. For a correct quotation, send the series and the code from the pump or motor nameplate, the pressure and flow rate required, the fluid and its temperature and, for screw pumps, whether you want the VP, VPM or VPC version. If the installation is in a hazardous zone, state this as well. Pumps and motors are supplied to order, usually within 1–4 weeks, and parts can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is confirmed in the quotation.
For screw pumps we check in the quotation the compatibility of the fluid with the chosen series, based on the viscosity and the impurity content you communicate.
Frequently asked questions about Miksan
What are the VP, VPM and VPC pumps and what else does the Miksan range include?
VP, VPM and VPC are screw pumps; VP is the pump without motor. The range also includes centrifugal pumps, electric motors, explosion-proof motors and vibrator motors. The company was founded in 1977 in Istanbul and has also made immersion pumps for machine tools since 1982. The VP series of screw pumps is specific to through-tool cooling.
What is the difference between VP, VPM and VPC in screw pumps?
VP is the pump alone, without motor. VPM is the pump with motor. VPC is the complete assembly, with motor, pump, pressure control valve, pressure gauge, tank cover and suction and discharge valves. Choose according to what you already have on the machine and send us the data.
Do you supply Miksan pumps in Romania, and how quickly?
For Miksan, pumps and motors arrive to order, usually within 1–4 weeks. A part can ship in 24–72 h when the item is in stock, locally or at the supplier. For special series the lead time can be longer, and we give it in the quotation.
Can I replace a Miksan pump already fitted on a machine tool?
Yes, if we identify the series. We need the series and the designation from the nameplate (for example VPM or AP), the motor power, and the pressure and flow rate of the installation. We check in the quotation whether the new pump has the same connections and motor flange.
What do I send for a quotation on a Miksan pump or motor?
The series, the nameplate, the fluid and its temperature, the pressure and flow rate, the voltage and frequency, the number of poles for a motor, the mounting position and whether an explosion-proof version is needed. For screw pumps also add whether the fluid contains particles.
How do I request a Miksan quotation?
Send the Miksan code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Miksan Motor (manufacturer documentation)

