LISEGA supplier in Romania
For LISEGA we quote spring hangers type 21 and 25, constant support hangers type 11 and 12–14, hydraulic dynamic dampers type 30 and 31 and pipe clamps; we need the load, the travel and the mounting type.
Headquarters: Zeven, Germany
Who is LISEGA and what does it make?
LISEGA, based in Zeven, Germany, makes support systems for industrial pipework. The range is organised into eight groups: constant hangers and supports, spring hangers and supports, dynamic components, clamps, pipe supports and pipe connections, roller supports, saddles and pre-insulated supports, connecting components, structural attachments and sliding plates, plus the LICAD software.
Spring hangers compensate small vertical thermal movements and rely on pre-compressed helical springs. Type 21 is the classic hanger, with an upper connection, type 25 is chosen when the space does not allow type 21 to be fitted, type 20 is the articulated support, type 27 is the spring rod working in tension and compression, type 29 is the spring support, and type 79 is the hanger beam. The standard range covers loads from 0.04 to 100 kN and movements of up to 400 mm. Constant support hangers turn the spring force into a constant force over a large vertical travel: type 11 is for loads of up to 100 kN, and 12–14 for loads of up to 500 kN; the range covers 0.13–500 kN and movements of up to 900 mm.
The dynamic components are types 30 and 31, that is hydraulic shock dampers (snubbers) for loads of up to 1000 and 5000 kN respectively, as well as types 32 (energy absorber), 39 (articulated rods), 3D (viscoelastic dampers), 3R (pipe restraint devices) and the clamps for alternating loads 34, 36 and 37. For a quotation, the type, the load, the travel and the mounting method matter.
What do we supply from the LISEGA range?
| Product | Description |
|---|---|
| Spring hangers and supports | Types 20, 21, 25, 27, 29 and 79 compensate small vertical thermal movements, using pre-compressed helical springs. Loads range from 0.04 to 100 kN, and the travel reaches 400 mm. |
| Constant hangers and supports | Type 11 for loads of up to 100 kN, 12–14 in parallel mounting for loads of up to 500 kN, 16 for large loads and 17 with active load adjustment. The range covers 0.13–500 kN and travels of up to 900 mm. |
| Hydraulic dynamic dampers | Types 30 and 31 are hydraulic shock dampers: at slow movement the valve stays open, and above a limit speed it closes and blocks the movement. Type 30 is for loads of up to 1000 kN, and type 31 for loads of up to 5000 kN. |
| Clamps, supports and sliding plates | Clamps for alternating loads 34, 36 and 37, pipe supports and pipe connections, roller supports, saddles and pre-insulated supports, structural attachments and sliding plates for larger horizontal movements. |
Why LISEGA?
- Spring hangers type 21 and 25 — type 25 solves the places where type 21 has no room to be fitted
- Constant support hangers, 0.13–500 kN — the force stays nearly constant over a large vertical travel
- Hydraulic dynamic dampers type 30 and 31 — they absorb the shock without blocking thermal expansion in service
- Clamps, pipe supports and sliding plates — components for connecting the pipe to the structure
- LICAD software — a tool for designing pipework systems, alongside the physical components
Which LISEGA codes and series are requested most often?
| Code | Description |
|---|---|
| Type 20 | Articulated spring support |
| Type 21 | Spring hanger, with upper connection |
| Type 25 | Spring hanger for limited space |
| Type 27 | Spring rod working in tension and compression |
| Type 29 | Spring support |
| Type 79 | Beam for spring or constant hangers |
| Type 11 | Constant hanger, up to 100 kN |
| Type 12-14 | Constant hanger in parallel mounting, up to 500 kN |
| Type 17 | Servo hanger with active load adjustment |
| Type 30 | Hydraulic dynamic damper, up to 1000 kN |
| Type 31 | Hydraulic dynamic damper, up to 5000 kN |
| Type 3D | Viscoelastic damper |
Where is LISEGA equipment used?
- Hot pipework installations — spring and constant supports for thermal movements
- Pipes exposed to shocks — hydraulic dynamic dampers type 30 and 31
- Pipework system design — LICAD software in the brand's range
- Industrial installations with horizontal movements — sliding plates and roller supports
- Pre-insulated pipes — pre-insulated supports and saddles for pipes
How do we supply LISEGA in Romania?
We can quote LISEGA pipe supports and hangers, by the type and load requested. For a correct quotation, send the type or code (for example type 25, type 11 or type 30), the working load, the travel or thermal movement, the mounting method (suspended or on a support), the pipe diameter and a drawing of the connection point. For an existing part, add a photo of the nameplate. We supply the types requested to order, usually in 1–4 weeks; depending on the type and the specification, the lead time may be longer, and the quotation confirms the date.
The choice of type and size for a support point is confirmed in the quotation, based on the load, the travel and the drawing received from you.
Frequently asked questions about LISEGA
What are Type 21, Type 11 and Type 30 at LISEGA?
Type 21 is the spring hanger with an upper connection, Type 11 is the constant hanger, up to 100 kN, and Type 30 is the hydraulic dynamic damper, up to 1000 kN.
When do I choose a type 25 hanger instead of type 21?
Type 21 is the classic hanger, with an upper connection. Type 25 is chosen when the space does not allow type 21 to be fitted or when the suspension chain would deviate too much. Send us the load, the travel and the drawing of the mounting point, and we identify the suitable type.
Are LISEGA products supplied in Romania, and how quickly?
LISEGA is supplied to order, usually in 1–4 weeks, and a type can ship in 24–72 h when the item is in stock, locally or at the supplier. Large sizes of hangers and dampers may take longer; each quotation states the exact date.
Can I replace an existing hanger with a LISEGA one?
Yes, after we compare the working load, the travel, the connection type and the mounting dimensions. Send the marking from the nameplate, a photo and the measured dimensions, and we check the fit before the quotation.
What data do I send for a Type 21 hanger or a Type 31 damper?
The type or code, the working load, the thermal movement or travel, the mounting method, the pipe diameter and a drawing of the connection to the structure. For dynamic dampers add the maximum shock load and the travel; they differ between type 30 and 31.
How do I request a LISEGA quotation?
Send the LISEGA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 22 November 2026 · Sources: LISEGA SE (manufacturer documentation)

