Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Rohmann supplier in Romania

Eddy current instruments and systems for NDT

Founded in 1977 · Headquarters: Frankenthal, Germany

Request a quote

Who is Rohmann and what does it make?

Rohmann GmbH is a privately owned German company from Frankenthal, founded in 1977, which develops and makes eddy current test equipment and systems for non-destructive testing. The instruments are used for detecting cracks, checking heat treatments, sorting mixed materials and identifying grinding burns. The products carry the ELO prefix: ELOTEST for handheld and inline instruments, ELOSCAN for robot systems, ELOWHEEL for aircraft wheel rims and ELORAIL for rails.

The manual line includes the ELOTEST M2, M3 and M6. The M3 is a two-frequency instrument with a 5.7-inch screen, also used for conductivity between 1 and 110 % IACS, while the M6 has a 7-inch touch screen, a C-scan function for array probes and rotors, and harmonic analysis. For automation there is the ELOTEST PL650, a digital platform (the PL650 R version, up to 16 channels), and the ELOTEST IS3, a single-channel inline instrument of 10 Hz–12 MHz in an IP54 housing. In the railway field there are the ELORAIL WPG D340, a carbon fibre trolley for rails, and the EC-Track-Scan, for checking head check cracks.

The range is of interest to NDT laboratories in energy and steelmaking, automotive component factories, aircraft maintenance workshops and railway infrastructure managers looking for cracks on the rail surface. The choice starts from the part, the defect sought, the frequency and whether the test is done manually or inline.

What do we supply from the Rohmann range?

ProductDescription
ELOTEST M2, M3 and M6Portable eddy current instruments: the M3 has two frequencies and a 5.7-inch screen for surfaces, bores and conductivity; the M6 has a 7-inch touch screen, C-scan for array probes and harmonic analysis for microstructure changes.
ELOTEST PL650 and IS3Inline platforms for automatic lines: the PL650 is a fully digital instrument, in several housings and with an R version controlled from a PC, up to 16 channels; the IS3 is a single-channel instrument of 10 Hz–12 MHz, IP54, for automatic screw testing and sorting machines.
ELOSCAN and ELOWHEELRobot systems for complex parts: the ELOSCAN Compact checks turbine wheels with automatic probe change, and the ELOWHEEL RPT18 checks aircraft wheel rims of up to 800 mm with a double sensor for surface cracks and internal defects.
ELORAIL and EC-Track-ScanThe ELORAIL WPG D340 is an ultra-light CFRP trolley for track gauges of 1400–1700 mm, magnetically guided, while the EC-Track-Scan detects head check cracks and is mounted on rail processing machines at speeds of up to 20 km/h.

Why Rohmann?

  • Over 45 years of specialisation in eddy currents, as a privately owned company — the same team covers the handheld instrument and the automatic installation
  • ELOTEST M6 with harmonic analysis and C-scan — also checks changes in microstructure, hardness or strength, not only cracks
  • ELOTEST PL650 platform in several housings, with an R version without interface and up to 16 channels — integrates into existing test lines
  • Systems for rails: ELORAIL with a light carbon fibre trolley and EC-Track-Scan for rail processing machines
  • In-house sensors and rotors (MR6, EC15, EC30) — probes are chosen for the part, the bore or the surface

Which Rohmann codes and series are requested most often?

CodeDescription
ELOTEST M2 V3Portable eddy current instrument, one-hand use
ELOTEST M3Portable two-frequency instrument with a 5.7-inch screen
ELOTEST M6Portable instrument with a 7-inch touch screen, C-scan, harmonic analysis
ELOTEST PL650Digital eddy current platform for inline lines
ELOTEST PL650 RRemote version of the PL650, up to 16 channels
ELOTEST PL650 RCPL650 variant with remote control
ELOTEST IS3Single-channel inline instrument, 10 Hz–12 MHz, IP54
ELOTEST HST 3Manual eddy current test trolley, for partially hardened zones on thick plates
ELOSCAN CompactRobot system for checking turbine wheels
ELOWHEEL RPT18System for inspecting aircraft wheel rims up to 800 mm
ELORAIL WPG D340Trolley for rail checking, track gauge 1400–1700 mm
EC-Track-ScanAutomatic rail checking for head check cracks
Minirotor MR6Hand rotor for bore inspection
Rotor EC15 compactCompact rotor for eddy current systems
Rotor EC30EC series rotor for rotor systems

Where is Rohmann equipment used?

  • Railway infrastructure — searching for head check and squat cracks on rails, including in points
  • Energy and steelmaking — checking of bars, long products and cylindrical rollers
  • Automotive component factories — material sorting and crack checking on parts, screws, cylindrical rollers
  • Aircraft maintenance — checking of wheel rims and aluminium structures
  • NDT laboratories — portable multi-frequency instruments and rotating probes

How do we supply Rohmann in Romania?

We can take requests for Rohmann eddy current instruments, their probes, rotors and accessories, both for manual testing and for automatic lines. We supply the equipment to order; standard instruments usually have a lead time of 1–4 weeks, while configured automatic systems may have a longer lead time, confirmed in the quotation. For an accurate quotation, send the material and the shape of the part, the defect sought (crack, grinding burn, material mix), the penetration depth, the frequencies you want and whether the test is manual or in-line. For replacements, state the model of the instrument or probe.

The compatibility of a probe with an older instrument is determined from the nameplate data, and automatic systems are supplied after the part and the line have been analysed.

Frequently asked questions about Rohmann

What products does Rohmann make?

Rohmann, a privately owned company from Frankenthal, founded in 1977, makes eddy current equipment for NDT: ELOTEST M2, M3 and M6 portable instruments, PL650 and IS3 inline instruments, ELOSCAN and ELOWHEEL robot systems, and ELORAIL and EC-Track-Scan rail installations.

How do I choose between the ELOTEST M3 and M6?

The M3 is a handheld two-frequency instrument with a 5.7-inch screen, suited to surfaces, bores and conductivity. The M6 adds a 7-inch touch screen, C-scan for array probes and harmonic analysis for microstructure. The choice depends on the part and the type of defect.

Do you supply Rohmann equipment in Romania, and how soon?

Yes. The equipment is supplied to order, usually in 1–4 weeks for standard instruments. Automatic systems, with a robot or for railways, have a longer lead time, which we confirm in the quotation.

Can I replace an older Rohmann instrument with a modern ELOTEST?

Probe compatibility is confirmed after checking. Send us the model and serial number of the instrument, the probes used (connectors, frequencies) and the parts tested, so that we can check which new instrument can take them over.

What data do you need for a quotation on an inline testing system?

The type of part (screws, bars, rollers, wheels), the dimensions, the line speed, the defect sought, the number of channels you want and the interface with the PLC. For the PL650 or IS3, also state the frequencies needed and the protection rating.

How do I request a Rohmann quotation?

Send the Rohmann code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Rohmann GmbH (manufacturer documentation)