Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SCHERDEL supplier in Romania

For SCHERDEL we quote compression, tension, torsion and disc springs, piston ring expanders and spiral spring weight compensators; for a quotation we need the drawing or the spring parameters, the material, the load and the quantity.

Founded in 1889 · Headquarters: Marktredwitz, Germany

Request a quote

Who is SCHERDEL and what does it make?

SCHERDEL is a German maker of technical springs and parts from wire and strip, founded in 1889 in Marktredwitz, where its head office is also located. The range includes compression, tension and torsion springs, disc springs, wave springs, spiral and constant-force springs, valve springs and expanders for piston rings, bent parts from wire and strip, fluid lines, assemblies and, separately, spiral spring weight compensation systems for machine tools.

The springs are made to the customer's requirements and drawings: round or profiled wire, bending machines with a CNC head and multi-slide machines, heat treatments, nitriding, coatings and design with in-house dynamic calculation software (SpringDesigner). Piston ring expanders are long compression springs with a very small outside diameter, made for rings with diameters of 45 to 1000 mm. Disc springs take large loads over a small stroke and can be stacked, in the same direction to add up the forces or in opposite directions to add up the stroke.

The spiral spring weight compensator for vertical machine tool axes supports the moving mass through a toothed belt (AT10 profile) that winds onto the casing of a pretensioned spiral spring. It can compensate about 100 kg per spring, with up to four springs per unit and a maximum stroke of 540 mm; several units combine modularly. It works with direct linear motors and with ball screw axes and requires no pipes, valves or hydraulic oil.

What do we supply from the SCHERDEL range?

ProductDescription
Compression, tension and torsion springsSprings from round or profiled wire, made to drawing, with heat treatments, nitriding or coatings. Torsion springs can work in the opening or closing direction, and compression springs serve for energy storage or return.
Disc, wave, spiral and constant-force springsDisc springs take large loads over small strokes and can be stacked; wave springs are made to drawing; spiral springs serve for returning mechanisms, and constant-force springs, made of coiled strip, give a uniform working force over the stroke.
Piston ring expandersLong compression springs with a very small outside diameter, for rings of 45–1000 mm, used mainly in diesel engines. They are supplied with wear protection options, such as gas or partial nitriding.
Spiral spring weight compensatorsUnits for vertical machine tool axes, with a maximum stroke of 540 mm, about 100 kg per spring and up to four springs per unit. The load is transmitted through an AT10 toothed belt, and the linear motor takes only the difference in force.

Why SCHERDEL?

  • Springs made to drawing — round or profiled wire, from torsion springs to disc and wave springs
  • In-house dynamic calculation software for compression and torsion springs — checking of loads and service life before manufacture
  • Spiral spring weight compensator — 100 kg per spring, 540 mm stroke, without valves, pipes or oil
  • Piston ring expanders in diameters of 45–1000 mm — large compression springs, with nitriding options
  • Surface treatments and coatings on request — set by the application, from nitriding to anti-corrosion coatings

Which SCHERDEL codes and series are requested most often?

CodeDescription
Compression springsCompression springs from round or profiled wire
Tension springsTension springs to drawing
Torsion springsTorsion springs, with load in the opening or closing direction
Disc springsDisc springs, stackable, for large loads over a small stroke
Wave springsWave springs made to drawing
Spiral springsSpiral return springs, dynamically loaded
Constant force springsConstant-force springs, from coiled strip
Valve springsSprings for combustion engine valves
Piston ring springsPiston ring expanders, Ø45–1000 mm
Hose clampsSelf-adjusting hose clamps with uniform pressure
Wire bending partsBent wire parts to drawing
Weight compensationSpiral spring compensator, 540 mm stroke, about 100 kg per spring
Flexible busbarsMultilayer flexible copper busbars

Where is SCHERDEL equipment used?

  • Machine tools — weight compensation on vertical axes with linear motors or ball screws
  • Machine and plant construction — technical springs and wire parts to drawing
  • Combustion engines — valve springs and expanders for piston rings
  • Electric power and electric mobility — multilayer flexible copper busbars for thermal and mechanical interfaces

How do we supply SCHERDEL in Romania?

We can quote SCHERDEL technical springs made to drawing and spiral spring weight compensators, based on the requirements of the application. The parts are supplied to order; depending on the specification, the lead time may be longer, and we confirm the date in the quotation. For an accurate request send the spring drawing or its parameters (wire diameter, mean diameter, number of coils, free length, load and stroke), the material, the working temperature and the quantity; for compensators, the mass to be balanced and the axis stroke.

A spring made to drawing can be reproduced only from the drawing or from complete parameters, and its service life is assessed from the real load and cycles in the application.

Frequently asked questions about SCHERDEL

What does SCHERDEL make?

SCHERDEL makes in Germany technical springs (compression, tension, torsion, disc, wave, spiral, constant force), bent parts from wire and strip, multilayer flexible copper busbars and spiral spring weight compensators for machine tools.

How do I choose between a spiral spring weight compensator and a hydraulic balancer?

The spiral spring compensator has no valves, pipes or hydraulic oil and has no switching times, while a hydraulic or pneumatic balancer needs a circuit and maintenance. One spring compensates about 100 kg, with a maximum stroke of 540 mm. Send the moving mass, the axis stroke and the type of drive.

Do you supply SCHERDEL springs in Romania, and how quickly?

Yes. SCHERDEL springs are supplied to order. Those made to drawing and the compensators are configured products, so, depending on the specification, the lead time may be longer; the date is confirmed in the quotation, after we receive the drawing or the parameters.

I have a spring without a drawing; can it be reproduced?

Yes, if we receive the parameters: the spring type, the wire diameter, the mean or outside diameter, the number of coils, the free length, the shape of the ends, the winding direction, the material and the load. We then check whether the geometry can be made; equivalence is confirmed from the full parameters, not from dimensions alone.

What data is needed for a quotation on disc springs or piston ring expanders?

For disc springs: the outside and inside diameter, the thickness, the load and the stroke, the stacking arrangement and the material. For expanders: the ring diameter (45–1000 mm), the radial load, the material and whether nitriding or other wear protection is needed.

How do I request a SCHERDEL quotation?

Send the SCHERDEL code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: SCHERDEL GmbH (manufacturer documentation)