Soleco supplier in Romania
For Soleco we quote spring anti-vibration mounts, elastomer dampers, bell-type mounts, foot kits for small installations and inertia bases with anti-seismic kits; we need the machine mass, the speed and the number of support points.
Headquarters: Pioltello (Milan), Italy
Who is Soleco and what does it make?
Soleco is an Italian company from Pioltello, near Milan, that designs and manufactures anti-vibration mounts and anti-seismic systems. The parts isolate the vibrations of machines such as air handling units, chillers, generators, pumps and compressors, and in the event of an earthquake or strong gusts of wind they keep the equipment stable on its foundation.
The programme has several families. The spring mounts are made in single-spring and multi-spring series, for example MC, EMC, MN, PMN, MS, MCS, B, K and J, plus large-deflection versions and LaL and LaLS anti-seismic mounts; they suit chillers, air handling units and heavy loads at low frequencies. The thermoplastic elastomer dampers (series such as MNT, SEG, NOCE and PNOCE) isolate the high frequencies of generators and transformers and work between -45 and +110 °C at hardnesses of 35, 45 and 70 ShA. The bell-type mount has two metal parts, in galvanised steel or AISI 316 stainless steel, and an elastic body of natural rubber in three hardnesses, without vulcanisation; the hardness is recognised by the colour of the pad on top, and the construction is patented.
Selection starts from the machine mass and its distribution over the support points, from the excitation frequency (speed) and from the deflection required. For machines that do not need isolation, for example uninterruptible power supplies (UPS) and transformers, Soleco also makes steel bases that ensure stability, and where needed the inertia bases reduce the vibration amplitude. For small installations there are foot kits with bolts, washers, nuts and instructions, colour-coded by the weight of the machine.
What do we supply from the Soleco range?
| Product | Description |
|---|---|
| Spring anti-vibration mounts | Single-spring series (MC, EMC, MN, PMN, MS, MCS, B, K, J) and multi-spring series, plus large-deflection versions and LaL and LaLS anti-seismic mounts. Used for chillers, air handling units and heavy loads at low frequencies. |
| Elastomer dampers | Series such as MNT, SEG, NOCE, PNOCE, MCFT, PIEDE, PLACCA and TPD, in thermoplastic elastomer resistant to ageing, hydrocarbons and UV rays. The hardness is shown by the colour of the part; a self-extinguishing UL94-V0 version is available on request. |
| Bell-type mounts | Two metal parts and an elastic body of natural rubber, without vulcanisation, so each mount is put together to measure. The anti-pull-out bushing prevents overturning, and AISI 316 stainless steel is recommended for offshore, sanitary and food use. |
| Inertia bases and anti-seismic kits | Steel bases, including with elastomer pads inside, for heavy machines or those with high frequencies, such as transformers. The anti-seismic kits are designed to requirement, and shake-table tests are carried out in test laboratories. |
Why Soleco?
- Spring mounts in single-spring or multi-spring series — the series is chosen by load and working frequency
- Thermoplastic elastomer dampers for high frequencies — temperature range from -45 to +110 °C at 35, 45 and 70 ShA
- Bell-type mount in galvanised steel or AISI 316 stainless steel — the stainless version suits offshore, sanitary and food environments
- Inertia bases and anti-seismic kits — earthquake stability for UPS units, transformers and generators
- Anti-vibration foot kits with mounting elements — simple installation under small equipment
Which Soleco codes and series are requested most often?
| Code | Description |
|---|---|
| MC | Spring anti-vibration mount, series MC–EMC–E–MN–PMN |
| EMC | Spring anti-vibration mount, same family as MC |
| MS | Spring anti-vibration mount, series MS–MCS–EMCS–ES–M–P |
| MNa | Spring anti-vibration mount, series MNa–PMNa–PAF |
| J | Spring anti-vibration mount, series J–Y–JY–JP–JYP |
| LaL | Anti-seismic anti-vibration mount, series LaL–LaLS |
| MNT | Elastomer damper, kit for small installations |
| SEG | Elastomer damper, kit for small installations |
| NOCE | Elastomer damper, series NOCE and PNOCE |
| MCFT | Elastomer damper, series MCFT–MCVT |
| TPD | Elastomer damper, series TPD |
| BB | Elastomer damper, series BB–BBS |
| MNAZC | Anti-vibration foot kit, kit MNAZC–PMNAZC |
Where is Soleco equipment used?
- Air conditioning and refrigeration — mounts for air handling units, chillers and heat pumps
- Energy — mounts and bases for generators and transformers
- Industry — isolation of pumps, compressors and fans
- Offshore platforms and oil and gas installations — stainless steel bell-type mounts with anti-pull-out bushing
- Buildings with anti-seismic requirements — bases and kits for UPS units and electrical equipment
How do we supply Soleco in Romania?
We can quote Soleco spring anti-vibration mounts, elastomer dampers, bell-type mounts, kits for small installations and anti-seismic kits. For an accurate quotation, send the type and mass of the machine, the speed of the motor or fan, the number of support points and, if there is one, the mount series from the nameplate. Items can ship in 24–72 h when the item is in stock, locally or at the supplier; series built to order usually take 1–4 weeks, with the exact lead time given in the quotation.
The exact series is established from the mass on each support point and the machine speed, so quotations start from this data.
Frequently asked questions about Soleco
What does Soleco make?
Soleco makes, from Pioltello, spring anti-vibration mounts, elastomer dampers, bell-type mounts, foot kits for small installations, inertia bases and anti-seismic kits. They are used under air handling units, chillers, generators, pumps and transformers.
Spring or elastomer, how do I choose?
The spring suits heavy loads and low frequencies, for example on chillers and air handling units. The elastomer isolates the high frequencies of machines such as generators and transformers. For a recommendation we need the mass of the machine and its speed.
How does anchoring differ between Soleco MC and EMC anti-vibration mounts?
On the MC series, plates have M8, M10 or M12 threaded holes for machine and/or ground anchoring; MCF and MCV versions have 12.5 mm and 16.5 or 20.5 mm through holes. On EMC, the upper plate has an M8, M10 or M12 threaded hole for the machine, and the base plate has 2 side holes for the ground.
Can I replace a mount already fitted on a machine?
As a rule, yes, if you send the series or a photo of the mount, the machine mass and the number of support points. We check whether the series still exists and what height and deflection it has, without assuming equivalences from the name.
What do I send for a quotation on anti-seismic mounts?
Send the mass and dimensions of the equipment, the position of the centre of gravity, the type of anchoring and, if the project requires it, the seismic standard to be met. With this data we check the suitable series and how long supply takes.
How do I request a Soleco quotation?
Send the Soleco code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Soleco engineering s.r.l. (manufacturer documentation)

