Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

BAMO supplier in Romania

For BAMO we quote BAMOMATIC electromagnetic flow meters, NIVOSTOP level controllers, MAGTOP indicators, BAMOPHAR pH meters and BAMOPHOX instruments for fluid analysis; the item is identified by the series and the reference on the instrument data sheet.

Founded in 1978 · Headquarters: Argenteuil, France

Request a quote

Who is BAMO and what does it make?

BAMO Mesures is a French manufacturer of sensors and instruments for fluid control and analysis, based in Argenteuil and active since 1978. The range covers physico-chemical water analysis (pH, redox, conductivity, turbidity, oxygen), level, flow and pressure measurement, as well as temperature sensors and instruments for communication and remote monitoring.

For level, the NIVOSTOP range brings together float controllers, for example NIVOSTOP C for aggressive liquids, with a polypropylene body, IP 68 protection rating and a maximum temperature of 100 °C. The range also includes vibrating-fork detectors, MAGTOP magnetic indicators, resistive probes, hydrostatic transmitters and ultrasonic and radar variants. For flow, the range goes from paddle controllers (CDP) and BAMOTUR turbine flow meters to BAMOFLONIC ultrasonic flow meters, vortex flow meters and water meters.

BAMOMATIC is a compact electromagnetic flow meter, with no moving parts, for conductive liquids above 20 µS/cm, with a range from 0.1 to 250 l/min and pulse and analog outputs. For analysis, BAMOPHAR 107 measures pH or redox potential with a colour touchscreen, two 0/4–20 mA outputs and four relays. For a quotation, what matters is the liquid, the measuring range, the outputs required and the series on the instrument data sheet.

What do we supply from the BAMO range?

ProductDescription
Flow meters BAMOMATIC and BAMOFLONICBAMOMATIC is a compact electromagnetic flow meter for low flows, between 0.1 and 250 l/min, with pulse and analog outputs. BAMOFLONIC is a family of ultrasonic flow meters for measurement with no moving parts.
NIVOSTOP level controllersFloat level controllers for tanks: NIVOSTOP C for aggressive liquids, PR2 / Ex, MEZZO, ECO and ACS. The tilt of the float operates a contact connected to the control cabinet.
Level indicators and probesThe MAGTOP 300 and MAGTOP 400 magnetic indicators show the level in the tank, while JAR and JAR-CR are ruler-type level indicators, the second with a reduced stroke. The range also includes hydrostatic transmitters and radar instruments.
Fluid analysis instrumentsBAMOPHAR 107 measures pH or redox, TURBICUBE is intended for turbidity, and the TCS 3020 probes measure conductivity. The instruments are used in water treatment, in dosing and in monitoring chemical processes.

Why BAMO?

  • Flow meters for conductive liquids with no moving parts, with BAMOMATIC — no mechanical wear in dosing and totalising installations
  • NIVOSTOP float level controllers for aggressive liquids — polypropylene body, FEP cable and FPM gasket
  • Several flow measurement principles in the same family — turbine, ultrasonic, vortex, paddle and variable area
  • pH and redox meters with analog outputs and relays, BAMOPHAR 107 — dosing control directly from the instrument
  • Instrumentation for water and chemical processes — level, flow, analysis and pressure in the same range

Which BAMO codes and series are requested most often?

CodeDescription
BAMOMATIC 775-02Compact electromagnetic flow meter, 0.1–250 l/min
BAMOFLONIC 776-01Ultrasonic flow meter
BAMOTUR 781-01Turbine flow meter
MICRO-STREAM 782-01Oval gear meter for low flows and viscous fluids
CDP 710-01Paddle flow controller
VORTEX 777-01Vortex flow meter
NIVOSTOP C 520-04Float level controller for aggressive liquids
NIVOSTOP PR2 / ExFloat level controller, PR2 / Ex variant
MAGTOP 300Magnetic level indicator
BAMOPHAR 107pH and redox meter with touchscreen
TURBICUBETurbidity instrument
TCS 3020Conductivity probe

Where is BAMO equipment used?

  • Water treatment — pH, redox, conductivity and turbidity measurement
  • Chemical dosing — electromagnetic flow meters for small volumes
  • Tanks and basins — level control with floats and magnetic indicators
  • Chemical industry — level controllers for aggressive liquids
  • Industrial water — meters, flow meters and leak detection

How do we supply BAMO in Romania?

We can quote BAMO instruments for measuring the level, the flow and the physico-chemical parameters of liquids. For an accurate quotation, send the name of the instrument or the series from its data sheet (for example BAMOMATIC, NIVOSTOP C or BAMOPHAR 107), the nature of the liquid, the measuring range, the working temperature and pressure and the type of output required. The instruments are supplied to order, usually in 1–4 weeks; for special series the lead time may be longer. We confirm it in the quotation.

For older instruments or those no longer in the range, we check a current variant in the quotation, based on the data from the nameplate.

Frequently asked questions about BAMO

What does the BAMO range cover besides BAMOMATIC 775-02 and NIVOSTOP C 520-04?

BAMOMATIC is the electromagnetic flow meter, and NIVOSTOP is the series for level control. BAMO Mesures, from Argenteuil, makes sensors and instruments for fluid control and analysis: pH and redox analysis, conductivity, turbidity, level, flow, pressure and temperature.

How do I choose a BAMO flow meter for a low flow?

BAMOMATIC covers from 0.1 to 250 l/min, but only for liquids above 20 µS/cm. For non-conductive liquids another family can be chosen, for example turbine or paddle. Send the liquid, the minimum and maximum flow and the temperature.

Do you supply BAMO in Romania, and how fast?

Yes. Flow meters, level controllers and analysis instruments are ordered, usually in 1–4 weeks. They can ship in 24–72 h when the item is in stock, locally or at the supplier. For special instruments the lead time is longer and is stated in the quotation.

Can I still find an older NIVOSTOP controller?

Yes, we propose a current variant also for series no longer in the range. For the check we need the name (for example NIVOSTOP C), the cable length, the contact type and the liquid controlled. We establish compatibility in the quotation.

What do I send for a quotation on a BAMO instrument?

The name or the series, the liquid, the measuring range, the maximum temperature and pressure and the type of output (pulses, 4–20 mA or relays). For level controllers specify the cable length, and for analysis state whether you are measuring pH, redox or conductivity.

How do I request a BAMO quotation?

Send the BAMO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: BAMO Mesures (manufacturer documentation)