Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

BD Sensors supplier in Romania

Electronic pressure and hydrostatic level transducers

Founded in 1994 · Headquarters: Thierstein, Germany

Request a quote

Who is BD Sensors and what does it make?

BD Sensors is a German manufacturer of electronic pressure and hydrostatic level transducers, headquartered in Thierstein, in northern Bavaria, founded in 1994. The range covers gauge and absolute pressure transducers in analogue and digital variants (IO-Link, RS 485 Modbus, I2C), plus submersible hydrostatic level probes (Tauchsonden) and threaded probes (Einschraubsonden). We can quote individual transducers or complete sets for monitoring a tank or a process line.

The technical difference comes from its own state-accredited pressure calibration laboratory (ISO/IEC 17025), which can calibrate gauge and absolute pressures of up to 5,000 bar. Hydrostatic level probes with a ceramic sensor, such as the LMK 808 series, measure level indirectly, through the pressure of the liquid column, a mechanically simpler solution than a float transducer in deep tanks.

For Romania, BD Sensors transducers make sense at water treatment plants and industrial installations where pressure or level monitoring with a digital output is needed, integrable directly into the existing automation system.

What do we supply from the BD Sensors range?

ProductDescription
Analogue and digital pressure transducersGauge and absolute pressure transducers, with classic analogue outputs (4-20mA, 0-10V) or digital outputs through IO-Link, RS 485 Modbus or I2C, for measuring ranges that depend on the model. The DMK 387 model is dedicated to low pressure values. Used for pressure monitoring in industrial or process installations. For a quotation, the customer must send the pressure range, the output type and the measured fluid.
Submersible hydrostatic level probes (Tauchsonden)Level probes with a ceramic sensor, submerged in the liquid of the tank or well, which measure level indirectly through the pressure of the liquid column. The LMK 808 model is part of the level probe range. Typical application: level monitoring in water tanks or wastewater treatment plants. For an order, the customer must send the depth to be measured and the cable length required.
Threaded probes (Einschraubsonden)Level or pressure probes mounted directly by thread on the wall or lid of the tank, suited where a submersible probe with a cable is not practical. They are used on pressurised tanks or installations where the mounting must be sealed by the thread. For a quotation, the customer must send the thread type needed and the desired measuring range.

Why BD Sensors?

  • Own pressure calibration laboratory, state-accredited (ISO/IEC 17025), for pressures of up to 5,000 bar
  • Transducers with IO-Link, RS 485 Modbus or I2C digital output, for direct integration
  • Company headquartered in Thierstein, Germany
  • Hydrostatic level probes with a ceramic sensor, for indirect measurement through the pressure of the liquid column
  • A range for gauge and absolute pressure as well as hydrostatic level, in the same family

Which BD Sensors codes and series are requested most often?

CodeDescription
DMP 331pressure transducer, range 0...100 mbar to 0...60 bar
DMP 333pressure transducer, range 0...100 bar to 0...600 bar
DMP 334high pressure transducer, 0...600 to 0...2200 bar
DMP 335pressure transducer, range 0...16 bar to 0...600 bar
DMP 336pressure transducer, range 0...16 to 0...1000 bar
DMP 339pressure transducer, range 0...60 bar to 0...600 bar
DMP 320pressure transducer, range 0...100 mbar to 0...600 bar
DMP 321compact pressure transducer, range 0...100 mbar to 0...600 bar
DMK 331ceramic pressure transducer, range 0...400 mbar to 0...600 bar
DMK 351ceramic pressure transducer, range 0...40 mbar to 0...20 bar
DMK 387pressure transducer for low pressures and filling heights
DMP 343low pressure transducer, 0...10 mbar to 0...1000 mbar
DMP 457pressure transducer, range 0...100 mbar to 0...600 bar
DMK 457ceramic pressure transducer, range 0...400 mbar to 0...600 bar
DMK 458ceramic pressure transducer, range 0...40 mbar to 0...20 bar

Where is BD Sensors equipment used?

  • Industrial machinery and installations — pressure monitoring on equipment
  • Energy — generation and transmission, pressure and level monitoring
  • Marine and yacht building — transducers resistant to the marine environment
  • Food and beverages — pressure monitoring on process lines
  • Chemicals and petrochemicals — transducers for aggressive media
  • Environmental protection — level monitoring in wastewater treatment plants

How do we supply BD Sensors in Romania?

We know the BD Sensors transducer range from the manufacturer's technical documentation; we confirm availability in the quotation. We bring the transducers in on order, usually in 1–4 weeks from confirmation, depending on the model and the output type. For a correct quotation we need the required measuring range, the output type (analogue or digital, with the protocol wanted) and, for probes, the depth or cable length. Availability from stock is checked model by model.

We request the individual calibration certificate for each transducer case by case, for the ordered batch.

Frequently asked questions about BD Sensors

What is the difference between the BD Sensors DMP and DMK transducers?

The DMP series uses a measuring cell with a metal element, usually stainless steel, suited to high pressures and aggressive media. The DMK series is based on a ceramic cell, more resistant to corrosion and to pressure peaks, with different measuring ranges depending on the model.

What pressure range does the BD Sensors DMP 334 transducer cover?

The DMP 334 covers a range from 0...600 bar to 0...2200 bar, being the variant in the DMP range intended for very high pressures. For lower pressures, the DMP range offers variants such as the DMP 320 or DMP 331, with ranges starting from 100 mbar.

What is the BD Sensors DMK 387 transducer?

The DMK 387 is a pressure transducer dedicated to measuring low pressures in systems and filling heights in tanks. It uses a ceramic cell, suited to media where corrosion resistance matters more than the maximum pressure withstood.

Do you supply BD Sensors transducers in Romania?

Yes, we procure on order the BD Sensors transducers from the DMP and DMK series presented above, starting from the manufacturer's data sheets; the range is not kept in our own stock. Delivery is made to order, usually 1–4 weeks, depending on the chosen model and the certification required.

What do I need to send for a BD Sensors pressure transducer quotation?

State the maximum working pressure expected, the nature of the measured fluid, the temperature of the installation environment and the form of the output signal you want, analogue or digital. With these details we can correctly recommend either a variant from the DMP series, with a metal cell, or one from the DMK series, with a ceramic cell, suited to your working medium.

How do I request a BD Sensors quotation?

Send the BD Sensors code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: BD Sensors, BD Sensors GmbH (manufacturer documentation)