CBI supplier in Romania
For CBI we quote EFA and GAV/GAX axial fans, CH, Z and EVO centrifugal fans and spare parts such as rotors and shafts with bearings; we need the series, the size, the serial number, the flow and the pressure.
Founded in 1963 · Headquarters: Monza, Italy
Who is CBI and what does it make?
CBI (Industrie CBI S.p.A.) is an Italian manufacturer of industrial fans, active since 1963, with its operational headquarters at Monza and a factory at Cambiago, near Milan. The range includes medium and high-pressure centrifugal fans, axial fans with adjustable blades, fans for tunnels and metro, plus spare parts for fans in service. For a quotation, send us the series and size from the fan nameplate, for example EFA, GAV, CH or Z, the flow and the pressure.
EFA axial fans have extruded aerofoil blades with an adjustable pitch angle, and reach 1,800 Pa and 480,000 m³/h, in seven sizes, with rotors of up to 2,240 mm. The GAV/GAX series, also with adjustable blades, is designed for high flow rates at relatively low pressures, up to 1,000 Pa, with the motor enclosed in an elongated hot-dip galvanized casing. GAT is the belt-driven axial version, for fluids that do not allow direct coupling, up to 180 °C, with the belts protected from the fluid. For tunnels, AXL works unidirectionally or reversibly, and CBJET jet fans have variants for smoke extraction at 400 °C for 2 hours, according to the manufacturer's documentation.
Among centrifugal fans, the CH series covers up to 7,000 Pa and 460,000 m³/h, with clean air or dust-laden air, in 19 sizes, with direct or belt drive. The Z and M series go up to 9,500 and 10,000 Pa, at temperatures up to 300 °C, EVO reaches 11,000 Pa and 400 °C, and H, with radial or backward-curved blades, 15,000 Pa. Several series are available in stainless steel or for areas with explosion risk, according to the manufacturer's documentation. The spare parts division supplies rotors, shafts with bearings, flow regulators, dampers, silencers and vibration isolators, including for discontinued models. Industrie CBI holds quality, environmental and safety certifications stated in the manufacturer's documentation.
What do we supply from the CBI range?
| Product | Description |
|---|---|
| EFA axial fans | Industrial axial fans with extruded aerofoil blades and an adjustable pitch angle, in seven sizes, with rotors of up to 2,240 mm. They reach a maximum pressure of 1,800 Pa and a flow of up to 480,000 m³/h, and the blade angle is set according to the operating point required. |
| GAV/GAX and GAT axial fans | GAV/GAX have adjustable blades and a rotor coupled directly on the motor shaft, in 13 sizes, up to 1,000 Pa and 300,000 m³/h. GAT use belt drive, with an inner guard, for fluids that do not allow directly coupled fans, up to 180 °C, in 12 sizes, between 400 and 2,240 mm. |
| CH, Z and M centrifugal fans | The CH series, with backward-inclined, aerofoil or straight blades, reaches 7,000 Pa and 460,000 m³/h and serves air conditioning, dryers, dust extraction, paint booths and boilers. Z (up to 9,500 Pa) and M (up to 10,000 Pa) work up to 300 °C, with direct or belt drive. |
| EVO and H high-pressure fans | EVO has straight, backward-inclined blades, direct drive, 11,000 Pa and resistance up to 400 °C. The H series, with radial or backward-curved blades, open or closed, reaches 15,000 Pa, up to 300 °C, with a carbon steel, stainless steel or polymer rotor and versions for areas with explosion risk. |
Why CBI?
- EFA axial fans with adjustable blades, up to 480,000 m³/h — the operating point is adapted to the installation through the blade angle
- Centrifugal fans from 7,000 Pa (CH) to 15,000 Pa (H) — the same brand for general ventilation and for high-pressure processes
- Versions up to 300–400 °C, in stainless steel or in variants for areas with explosion risk — suited to furnaces, dryers and areas with an explosive atmosphere
- AXL and CBJET tunnel fans — variants for smoke extraction in case of fire
- Spare parts for discontinued models — rotors, shafts with bearings and dampers for fans in service
Which CBI codes and series are requested most often?
| Code | Description |
|---|---|
| EFA | Axial fan with adjustable blades, up to 1,800 Pa and 480,000 m³/h |
| GAV/GAX | Axial fan with adjustable blades, direct coupled, up to 1,000 Pa |
| GAT | Belt-driven axial fan, up to 180 °C |
| AXL | Axial fan for tunnels and processes, unidirectional or reversible |
| CBJET | Jet fan for tunnels, certified for smoke at 400 °C/2 h |
| CH | Centrifugal fan up to 7,000 Pa and 460,000 m³/h, 19 sizes |
| Z | Centrifugal fan with straight backward-inclined blades, up to 9,500 Pa |
| M | Centrifugal fan with straight blades, up to 10,000 Pa and 300 °C |
| EVO | Direct-drive centrifugal fan, up to 11,000 Pa and 400 °C |
| H | High-pressure centrifugal fan, up to 15,000 Pa |
| Spare parts | Rotors, monobloc units, shafts with bearings, flow regulators, dampers, isolators |
Where is CBI equipment used?
- Iron and steel and metallurgy — centrifugal process fans, including for high temperatures
- Cement, ceramics and bricks — process fans for production installations
- Pulp and paper, wood industry — fans for industrial dryers
- Energy and waste management — industrial process fans
- Road, rail and metro tunnels — AXL and CBJET fans for ventilation and smoke extraction
How do we supply CBI in Romania?
We quote CBI axial fans (EFA, GAV/GAX, GAT, AXL, CBJET) and centrifugal fans (CH, Z, M, EVO, H), as well as spare parts: rotors, shafts with bearings, dampers and vibration isolators. For an accurate quotation, send us the series, size and serial number from the nameplate, the flow and the working pressure, the temperature and the nature of the gas handled and, for parts, photos of the assembly. We supply the fans and the parts from Italy, to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer. We confirm the exact lead time in the quotation.
We supply CBI fans and parts according to the nameplate data and your parameters; installation, alignment and balancing on site are organised with your maintenance team or an installer of your choice.
Frequently asked questions about CBI
What does CBI make?
CBI makes centrifugal and axial industrial fans in Italy, fans for tunnels and metro and spare parts for fans. The axial range includes the EFA, GAV/GAX, GAT and AXL series, and the centrifugal range the CH, Z, M, EVO and H series, with versions for high temperatures, in stainless steel or for areas with explosion risk, according to the manufacturer's documentation.
How do I choose between an EFA axial fan and a CH centrifugal one?
The EFA axial moves very high flow rates, up to 480,000 m³/h, at pressures of at most 1,800 Pa. When the pressure required exceeds this range, the CH centrifugal comes into consideration, up to 7,000 Pa, with clean air or dust-laden air. Send us the flow, the pressure and the gas temperature.
Do you deliver CBI fans and parts in Romania, and in what lead time?
Yes, we supply them from Italy, to order, usually in 1–4 weeks. A large fan configured to order or a rotor made to a drawing may, depending on the specification, have a longer lead time. An item can ship in 24–72 h when the item is in stock, locally or at the supplier; we confirm the lead time in the quotation.
We have an older EFA axial fan. Are parts still available for it?
As a rule yes: the CBI parts division supplies rotors, shafts with bearings and other components also for discontinued models. Send us the full type from the nameplate, with the size and the serial number, the number of blades and their angle, plus photos of the rotor and the hub, so that we can identify the suitable part.
What details should I send for a quotation on a new CBI fan?
The flow (m³/h), the total or static pressure (Pa), the temperature and composition of the gas (clean air, dust, corrosive vapours, explosive atmosphere), the type of drive (direct or belt), the mounting position and the motor voltage. If you are replacing an existing fan, add the series and size from the nameplate and the connection dimensions.
How do I request a CBI quotation?
Send the CBI code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Industrie CBI S.p.A. (manufacturer documentation)

