Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Klaus Union supplier in Romania

Magnetic-drive pumps for hazardous chemical fluids

Headquarters: Bochum, Germany

Request a quote

Who is Klaus Union and what does it make?

Klaus Union is a German manufacturer of magnetic-drive (sealless) pumps, based in Bochum, specialised in transferring hazardous chemical fluids without a mechanical seal exposed to the environment. The SLM range covers everything from compact ANSI-dimensioned pumps to high-capacity pumps for high-pressure and high-temperature duties. For the Romanian market we can quote SLM pumps based on the required flow, pressure and chemical compatibility.

What sets Klaus Union apart is the very wide span covered by the SLM family: from SLM-AVB for general ANSI duties with close-coupled mounting, to SLM-AVP built to API 685 for heavy duties with temperatures up to 450°C, or SLM-NHO dedicated to hot thermal oil transfer. The absence of a mechanical seal eliminates the risk of leakage at the pump shaft — a technical advantage over conventional centrifugal pumps with a mechanical seal, when the pumped fluid is toxic, flammable or hard to remove from the environment in case of a leak.

For refineries, chemical platforms and petrochemical installations in Romania, Klaus Union pumps are relevant where zero-leakage sealing is a safety requirement, not just an efficiency one — for example when transferring acids or solvents where a leak would have serious consequences.

What do we supply from the Klaus Union range?

ProductDescription
SLM-AVO/AVB Series Sealless PumpsMagnetic-drive pumps, ANSI-dimensioned, with a maximum flow of 800–1,000 GPM and a head of up to 450 ft. SLM-AVO is the modular version, and SLM-AVB the close-coupled version for installations with limited space. Working temperatures up to 572°F for AVO. Used for transferring general chemical fluids where a leak at the mechanical seal is not acceptable for safety or environmental reasons.
SLM-NVO/NVH Series Sealless PumpsHigh-capacity pumps, with a maximum flow of up to 18,000 GPM for NVO and high pressures for NVH (up to 3,500 GPM and 5,800 psi), for process duties with high flows or severe discharge pressures. Working temperatures up to 752°F for NVH. Typical application: petrochemical plants where transfer of hazardous fluids is done on a large scale, with strict zero-leakage sealing requirements.
SLM-AVP/NHO Series API 685 Sealless PumpsFamily built to the API 685 standard for heavy-duty process sealless pumps, with flows up to 18,000 GPM and working temperatures up to 840°F. SLM-NHO is dedicated to transferring hot thermal oil in process heating circuits. Materials and tolerances meet the API requirements for refinery and petrochemical installations where long-term reliability is critical.

Why Klaus Union?

  • Sealless magnetic-drive pumps, without a mechanical seal exposed to the pumped fluid
  • Quality certifications indicated in the manufacturer's technical documentation for production at the Bochum, Germany site
  • API 685 range for heavy duties, with working temperatures up to 450°C
  • Dedicated versions for hot thermal oil and duties with high discharge pressure

Which Klaus Union codes and series are requested most often?

CodeDescription
SLM-AVOModular ANSI sealless pump, up to 1,000 GPM
SLM-AVBClose-coupled ANSI sealless pump, up to 800 GPM
SLM-NVOHigh-capacity sealless pump, up to 18,000 GPM
SLM-NVHHigh-pressure sealless pump, up to 5,800 psi
SLM-AVPAPI 685 sealless pump, up to 840°F
SLM-NHOSealless pump for hot thermal oil
SLM-NVTSealless pump, temperature -50 to 150°C
SLM-SVOCompact sealless pump, up to 180 GPM
SLM-GVOSealless pump, up to 1,500 GPM
SLM-GVOTHigh-pressure sealless pump, up to 5,800 psi
SLM-HVOMedium-pressure sealless pump, up to 1,450 psi
SLM-LVOSealless pump, temperature up to 300°C
SLM-DVOSealless pump, general duties up to 120°C

Where is Klaus Union equipment used?

  • Refineries — transfer of petroleum fluids and intermediate products
  • Chemicals and petrochemicals — pumping acids, solvents and toxic fluids without an exposed seal
  • Energy — hot thermal oil circuits for process heating
  • Industrial gases — transfer of fluids at low temperatures (down to -120°C, depending on the series)
  • Pharmaceuticals — transfer of fluids where contamination through leakage is not acceptable

How do we supply Klaus Union in Romania?

For Klaus Union pumps we rely on the manufacturer's technical documentation for the description of the SLM series and on the process data sent by the customer to identify the suitable model — this range is project-configured equipment, supplied to order. We supply them to order through EU supply channels, usually in 1–4 weeks, confirmed individually depending on the materials and options requested. For a quotation we need the required flow, the discharge pressure, the fluid temperature and the chemical compatibility of the wetted materials. Warranty service during the warranty period remains with the manufacturer; API 685 certification for a model is confirmed based on the project documentation.

API 685 certification for a specific model is confirmed based on the specific order documentation; warranty interventions are handled through the manufacturer.

Frequently asked questions about Klaus Union

What does Klaus Union make?

Klaus Union makes magnetic-drive (sealless) centrifugal pumps, without a mechanical seal exposed to the pumped fluid, for transferring hazardous chemical fluids, hot thermal oil and process duties with high pressure or temperature in refineries and petrochemicals.

What is the difference between a Klaus Union magnetic-drive pump and a conventional centrifugal pump with a mechanical seal?

Klaus Union SLM pumps eliminate the mechanical seal through the magnetic coupling — useful when the pumped fluid can have no leakage at the shaft, unlike a pump with a conventional seal. Flow, pressure and temperature depend on the SLM series chosen and are confirmed on the data sheet.

How do I choose the right SLM model for a project?

Please send us the required flow, the discharge pressure, the working temperature of the fluid and the required wetted material (chemical compatibility). From these data we identify whether a standard, API 685 or hot thermal oil version is needed.

Do you deliver Klaus Union pumps in Romania, and how long does it take?

Yes, we supply Klaus Union pumps to order through EU supply channels, usually in 1–4 weeks, confirmed exactly once the manufacturer validates the materials and options required by the project.

How do I request a Klaus Union quotation?

Send the Klaus Union code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: Klaus Union (manufacturer documentation)