Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SAMA supplier in Romania

For SAMA we offer CPF and DCR centrifugal fans, A6/S-N and A6/S-R axial fans, TC/R roof extractors and special versions in stainless steel, galvanised steel or plastic; the item is identified by series, flow rate and pressure.

Founded in 1978 · Headquarters: Maserà di Padova, Italy

Request a quote

Who is SAMA and what does it make?

SAMA is an Italian industrial ventilation company based in Maserà di Padova, active since 1978. The programme includes centrifugal fans, axial (propeller) fans, roof extractors, fans in special versions, and impellers with accessories. Applications range from extraction of clean or lightly dusty air from halls and workshops to material cooling, dryers and paint booths.

The CPF series is a centrifugal fan with a forward-curved impeller, made of galvanised sheet and dynamically balanced, for clean air at low and medium pressures. It is used for welding fume extraction, for combustion air for burners and for material cooling. The DCR series has a backward-curved impeller, made of welded sheet, and covers high flow rates, from air extraction in conditioning installations to paint booths and fodder drying. At temperatures above the limit of the standard version, or in aggressive environments, there are stainless steel versions for high temperatures and ATEX versions for zones 1-21 and 2-22 in the CPF, DCR and A6/S series.

The A6/S-N and A6/S-R axial fans move large volumes of air at low pressure, with aerodynamic profile blades in composite plastic or die-cast aluminium, in suction or in discharge. The TC/R roof extractors discharge air horizontally, through a centrifugal impeller with backward-curved blades. The motors are standardised three-phase UNEL-MEC motors, directly coupled or, in some series, driven by belts and pulleys. For a quotation, what matters is the flow rate, the pressure, the fluid temperature, the direction of rotation and the motor type.

What do we supply from the SAMA range?

ProductDescription
CPF: centrifugal fans with forward-curved bladesWelded steel sheet casing, dynamically balanced galvanised sheet impeller and directly mounted standardised three-phase motor. The declared range is 30–300 mm H2O at 70–1,300 m³/h, for clean air up to 80 °C in the standard version, including welding fume extraction.
DCR: centrifugal fans with backward-curved bladesImpeller with backward-curved blades, with good efficiency, for clean or lightly dusty air. The range is 10–390 mm H2O at 1,320–96,000 m³/h. They are fitted in conditioning installations, paint booths, cooling systems and grain dryers; the motor is coupled directly or through belts.
A6/S-N and A6/S-R: axial fansPropeller fans with a composite plastic or die-cast aluminium impeller, for suction or discharge. The range is 2–24 mm H2O at 450–29,000 m³/h, with clean air up to 40 °C. They appear in dryers, unit heaters, cold rooms and material cooling.
TC/R: roof extractorsExtractor with horizontal discharge, galvanised sheet centrifugal impeller, galvanised base and ABS cover with a protective mesh. The range is 8–60 mm H2O at 300–18,000 m³/h. It serves air exchange in civil and industrial buildings, workshops and garages.

Why SAMA?

  • Two centrifugal families, CPF and DCR: forward-curved blades for low and medium pressures, backward-curved blades for high flow rates, so the series is matched to the installation, not the other way round
  • A6/S-N and A6/S-R axial fans with aerodynamic blades, suited to clean air in large volumes, in dryers, heat exchangers and cold rooms
  • ATEX versions for zones 1-21 and 2-22 in CPF, DCR and A6/S, for installations with a potentially explosive atmosphere
  • Versions in stainless steel, hot or cold galvanised, polypropylene or polyethylene: the material is chosen according to the extracted fluid, including corrosive fluids
  • Clockwise (RD) or counterclockwise (LG) rotation and a casing that can be turned in 45° steps: the position of the discharge outlet is chosen according to the installation layout

Which SAMA codes and series are requested most often?

CodeDescription
CPFCentrifugal fan with forward-curved blades, for clean air at low and medium pressures
DCRCentrifugal fan with backward-curved blades, for high flow rates of clean or lightly dusty air
A6/S-NAxial fan with aerodynamic blades, in suction or discharge
A6/S-RAxial fan from the same A6/S family, for large air volumes at low pressure
TC/RRoof extractor with horizontal discharge
RDClockwise direction of rotation, for centrifugal fans
LGCounterclockwise direction of rotation, for centrifugal fans
ATEX 1-21 / 2-22Version for areas with a potentially explosive atmosphere, for CPF, DCR and A6/S

Where is SAMA equipment used?

  • Welding and metalworking: welding fume extraction and cooling of parts with CPF fans
  • Industrial paint shops: extraction from paint booths with DCR fans
  • Agriculture and food industry: drying of fodder and grain
  • Air conditioning and refrigeration: heat exchangers, unit heaters and cold rooms with axial fans
  • Industrial buildings: ventilation of halls and workshops with TC/R roof extractors

How do we supply SAMA in Romania?

We can quote SAMA centrifugal and axial fans and roof extractors, including special versions in stainless steel or for areas with an explosive atmosphere. For a correct quotation, send the series, the name from the nameplate, the flow rate and working pressure, the fluid temperature, the direction of rotation and the motor data. For a replacement, the dimensions of the connections also help. We supply the fans to order; it usually takes 1–4 weeks, but depending on the series and the specification the lead time can be longer. The exact lead time appears in the quotation.

For ATEX versions or aggressive fluids, we set the exact version in the quotation, based on the process data you send.

Frequently asked questions about SAMA

What fans does SAMA make?

SAMA makes centrifugal fans (CPF and DCR series), A6/S-N and A6/S-R axial fans, TC/R roof extractors and special versions. It is based in Maserà di Padova, Italy, and its activity in industrial ventilation dates from 1978.

How do I choose between a CPF and a DCR fan?

CPF has forward-curved blades and works at low flow rates, up to 1,300 m³/h, with pressure up to 300 mm H2O. DCR has backward-curved blades and reaches 96,000 m³/h. Send us the flow rate, the pressure and the air temperature, and we will indicate the suitable series.

Are there SAMA fans for areas with an explosive atmosphere?

The CPF, DCR and A6/S series have ATEX versions for zones 1-21 and 2-22. For a quotation we need the classification zone, the gas or dust in the process, the temperature and the motor data. The confirmed version is entered in the quotation before the order.

What data do I send if a fan has to be replaced?

The series and size from the nameplate, the direction of rotation (RD or LG), the position of the discharge outlet, the motor data and the required flow rate. A photo of the nameplate shortens the check and helps us establish whether a belt-driven version is needed.

How soon can I receive a SAMA fan in Romania?

A SAMA fan is supplied to order, usually in 1–4 weeks. A fan or impeller can ship in 24–72 h when the item is in stock, locally or at the supplier. For special or ATEX versions the lead time can be longer, and the confirmed date appears in the quotation.

How do I request a SAMA quotation?

Send the SAMA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: SAMA S.r.l. (manufacturer documentation)