SUNS supplier in Romania
For SUNS we quote limit switches of the SN4, SNB, HEN and SSD4 series, HNS wireless limit switches, interlock safety switches, foot switches and micro switches; the item is identified by series and contact type.
Who is SUNS and what does it make?
SUNS International is a manufacturer of industrial switches. The range starts from limit switches but also includes safety switches, heavy-duty limit switches, wireless limit switches, versions for explosive atmospheres, elevator interlocks, industrial foot switches, micro switches, proximity switches, industrial joysticks and terminal blocks.
Limit switches detect the position of a moving part and send the signal to the programmable controller. The SN4 series is a safety limit switch with a die-cast zinc housing, IP67 protection and EN 50047 compliance. The contact blocks are interchangeable, snap-action or slow-action, and the normally closed contacts have positive opening. The SNB series is intended for heavy duty, with IP65 protection and up to 3,600 operating cycles per hour. The HEN series uses a stainless steel housing and hermetic sealing, with circuit configurations from single-pole up to six-pole changeover.
The HNS series eliminates the cable between the limit switch and the controller: it transmits the signal by radio on 433, 470, 868 or 915 MHz, over a distance of 100 m in open field, with IP66/IP67 protection. The SSD4 series is a latching limit switch, reset remotely with an electrical pulse, used in the overspeed governors of machine-room-less elevators and in wind turbines. For a quotation, the series, the actuator type, the number and type of contacts, the protection rating and the working voltage matter.
What do we supply from the SUNS range?
| Product | Description |
|---|---|
| SN4 — safety limit switches | Die-cast zinc housing, M20, PG13.5 or 1/2 inch NPT cable entry and four actuator positions. Interchangeable contact blocks, snap-action or slow-action, 10 A at 600 V AC, IP67 protection, working temperature between −25 and 80 °C. |
| SNB — heavy-duty limit switches | Robust limit switch with IP65 protection, up to 3,600 cycles per hour and resistance to vibration and shock. Wiring is with screw terminals, and the cable entry is 1/2 inch NPT or PG13.5. The variants in the series include SNB-27 and SNBP-27. |
| HEN — sealed limit switches for demanding environments | Housing and bushing in 300 series stainless steel, hermetic sealing, gold-plated or silver alloy contacts and circuit configurations up to six-pole changeover. The standard working temperature is between −54 and 125 °C, and the high-temperature version reaches 315 °C. |
| HNS and SSD4 — wireless and latching limit switches | The HNS has a die-cast zinc or stainless steel body, a radio band of 433, 470, 868 or 915 MHz and a range of 100 m in open field. The SSD4 stays locked after actuation and is reset remotely with a pulse of 24 V DC, 48 V DC, 120 V AC or 240 V AC. |
Why SUNS?
- Compact, safety, sealed and heavy-duty limit switches in the same family — supply can be standardised on a single brand for machines with different requirements
- Normally closed contacts with positive opening on the SN4 series — important for machine safety circuits
- Stainless steel housing and hermetic sealing on the HEN — for environments with moisture, dust or extreme temperatures, between −54 °C and 125 °C in the standard version
- HNS wireless limit switches with a selectable radio band — installed where cabling is difficult or the part moves
- SSD4 latching limit switch, with remote electrical reset — suited to machine-room-less elevators and wind turbines
Which SUNS codes and series are requested most often?
| Code | Description |
|---|---|
| SN4 | Safety limit switch in a zinc housing, IP67, to EN 50047 |
| SNB-27 | Heavy-duty limit switch, from the SNB series |
| SNBP-27 | Variant of the SNB heavy-duty limit switch |
| HEN212-25-S | Sealed stainless steel limit switch, from the HEN series |
| HEN211-25E-C6 | Sealed stainless steel limit switch, from the HEN series |
| HEN211-25-U8 | Sealed stainless steel limit switch, from the HEN series |
| SSD4 | Latching limit switch with remote electrical reset |
| HNS | Wireless limit switch with selectable radio band |
| SN2 | Safety limit switch, from the limit switch range |
| SN6 | Safety limit switch, from the limit switch range |
| SN7 | Small limit switch in an enclosed housing |
| SN9 | Limit switch in an enclosed housing |
Where is SUNS equipment used?
- Elevators — SSD4 latching limit switches for overspeed governors, alongside dedicated elevator interlocks
- Wind energy — latching limit switches for turbines with difficult service access
- Machine safety — SN4 limit switches with positive opening of the normally closed contacts
- Processing in demanding environments — sealed stainless steel HEN limit switches
- Places with difficult cabling — HNS wireless limit switches with a range of 100 m in open field
How do we supply SUNS in Romania?
We can quote SUNS limit switches and safety switches, including wireless limit switches and versions for demanding environments. For a correct quotation, send the series or the full designation from the body, the actuator type (roller, rod, lever), the number and type of contacts, the voltage and current, the protection rating and the cable entry. For replacements, a photo of the body helps us. The limit switches are supplied to order, usually within 1–4 weeks; depending on the series and the specification, the lead time can be longer. We give the exact lead time in the quotation.
We check the exact series and the contact type from the code on the limit switch body before the quotation.
Frequently asked questions about SUNS
Which limit switch families does SUNS include, from SN4 and SNB to HEN, HNS and SSD4?
SUNS International makes limit switches, interlock safety switches, heavy-duty limit switches, wireless limit switches, versions for explosive atmospheres, industrial foot switches, micro switches and proximity switches.
How do I choose between an SN4 and an SNB limit switch?
The SN4 is a safety limit switch in a zinc housing, with IP67 and positive opening of the contacts. The SNB is for heavy duty, with IP65 and up to 3,600 cycles per hour. The choice depends on the duty cycle, the environment and the actuator type, so send us the application.
Do you supply SUNS limit switches in Romania, and how quickly?
SUNS limit switches are ordered, usually within 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the series and the specification, the lead time can be longer; we give it in the quotation.
Can I replace a wired limit switch with an HNS wireless one?
It is possible, if the receiver and the permitted radio band match. The HNS series transmits by radio on 433, 470, 868 or 915 MHz, over 100 m in open field, with a battery and IP66/IP67 protection. Send us the current model and the installation conditions for checking.
What data do I send for a quotation on an SN4, SNB or SSD4 limit switch?
The series or the code from the body, the actuator type, the contacts (for example 1 NO + 1 NC), the voltage and current, the cable entry (M20, PG13.5 or 1/2 inch NPT) and the working environment. For the SSD4 series, the voltage of the reset pulse also matters.
How do I request a SUNS quotation?
Send the SUNS code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: SUNS International (manufacturer documentation)

