Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Mecmesin supplier in Romania

For Mecmesin we quote OmniTest universal machines, BFG, CFG+ and VFG force gauges, MultiTest-dV and Vortex-dV test stands, the TTT-300 tool tester and FMT-W30 and FMT-W40 pull testers, based on the maximum force or torque and the standard required.

Founded in 1977 · Headquarters: Slinfold, West Sussex, United Kingdom

Request a quote

Who is Mecmesin and what does it make?

Mecmesin is a British manufacturer of instruments for measuring force and torque in quality control, based in Slinfold, West Sussex, and active since 1977. The range runs from handheld mechanical force gauges to software-controlled universal testing machines, with extensometers, sensors, environmental chambers and grips. They test tension, compression, bending, shear, peel, pull-out and friction, on parts and materials from the production line or the laboratory.

The OmniTest universal machines are benchtop, for 0.5, 1 and 2.5 kN, single-column for 5 and 7.5 kN, and for 10, 25 and 50 kN, in versions controlled from a computer or via a touchscreen console. For smaller samples, MultiTest-dV is a motorised force test stand and Vortex-dV a torque test stand. The BFG digital force gauges cover 10 to 2500 N, CFG+ covers 50 to 500 N, and VFG is the version with a 5-inch touchscreen, as is the VFTI indicator for smart force and torque sensors. The MDD, LCP/S and ValuTest manual stands can be combined with any digital force gauge. There is also the Alluris TTT-300 tightening tool tester, for torque wrenches per ISO 6789, the FMT-W30 and FMT-W40 pull testers for cable terminals and a penetrometer for sprayed concrete, per BS EN 14488-2. The VectorPro software calculates Young's modulus, yield strength and elongation at break.

Instruments of this kind are used on automotive and electronic component lines, in materials laboratories, in packaging, in construction and in workshops that check torque tools. The choice depends on the maximum force or torque, the type of sample and the test standard, which is why the quotation starts from the list of tests and the existing instrument.

What do we supply from the Mecmesin range?

ProductDescription
OmniTestBenchtop universal testing machines, from 0.5 kN to 50 kN, for tension, compression, bending and peel, controlled from a computer or from a touchscreen console, with extensometers, load cells and dedicated grips.
BFG, CFG+ and VFG force gaugesPortable digital force gauges for tension and compression: basic CFG+ from 50 to 500 N, BFG from 10 to 2500 N and touchscreen VFG, in a housing for harsh environments; they are mounted on manual or motorised stands.
Vortex-dV, VTG Tornado and TTT-300Torque instruments: Vortex-dV is a motorised test stand, VTG Tornado measures the closing torque of caps, and TTT-300 checks torque wrenches and screwdrivers per ISO 6789.
FMT-W40, FMT-W30 and the sprayed concrete penetrometerPull testers for cable terminals, motorised FMT-W40 and manual FMT-W30, and a portable set for measuring the early strength of sprayed concrete, per BS EN 14488-2, Method A.

Why Mecmesin?

  • Benchtop universal machines from 0.5 to 50 kN — OmniTest covers four force ranges, with a computer or touchscreen console version
  • Digital force gauges by usage class — CFG+ from 50 to 500 N, BFG from 10 to 2500 N and VFG with a 5-inch touchscreen
  • Motorised stands for force and torque — MultiTest-dV and Vortex-dV keep the speed constant, for repeatable tests
  • Checking of torque tools — TTT-300 has five models, from 0.2–2 N·m to 5–50 N·m, with certificate software per ISO 6789
  • Pull testers for cable terminals — motorised FMT-W40, with seven speeds, and manual FMT-W30, both up to 500 N or 1000 N

Which Mecmesin codes and series are requested most often?

CodeDescription
OmniTest 0.5/1/2.5Benchtop universal machine, 0.5 / 1 / 2.5 kN
OmniTest 5/7.5Single-column universal machine, 5 / 7.5 kN
OmniTest 10/25/50Benchtop universal machine, 10 / 25 / 50 kN
MultiTest-dVMotorised stand for force tests
Vortex-dVMotorised stand for torque tests
BFGDigital force gauge, 10–2500 N
CFG+Compact digital force gauge, 50–500 N
VFGForce gauge with 5-inch touchscreen
VFTITouchscreen indicator for force and torque sensors
AFTIAdvanced indicator for smart sensors
MDDPrecision manual stand with wheel, up to 1000 N
LCP/SPrecision manual stand with lever, up to 500 N
TTT-300Tester for torque wrenches and tools, 5 models
FMT-W40Motorised pull tester for terminals
FMT-W30Manual pull tester for terminals
VectorProTest calculation software

Where is Mecmesin equipment used?

  • Automotive and electronics — pull-out force on cable terminals, connectors and components
  • Plastics and rubber — tension, compression and bending on standardised samples
  • Construction — early strength of sprayed concrete and tests on construction products
  • Packaging — closing torque, peel and weld strength
  • Maintenance and calibration — checking torque wrenches and tightening tools

How do we supply Mecmesin in Romania?

We can quote Mecmesin universal testing machines, force gauges, motorised stands and torque instruments, supplied to order. The lead time is usually 1–4 weeks to order, and depending on the specification it may be longer for configurations with sensors, chambers and special grips. For a quotation, send us the maximum force or torque, the type of sample, the test standard, the speed required, the grips you need and the model of the existing instrument, if you are extending one. The exact lead time is confirmed in the quotation.

The choice between a manual and a motorised stand starts from the maximum force, the test speed and the number of samples per day.

Frequently asked questions about Mecmesin

What does Mecmesin make?

Mecmesin, based in Slinfold (West Sussex) and active since 1977, makes force and torque instruments: OmniTest universal machines, digital and mechanical force gauges, manual and motorised stands, torque testers, pull testers for terminals and the VectorPro software. They are used for quality control in production and in the laboratory.

How do I choose between a BFG, CFG+ and VFG force gauge?

CFG+ is the basic version, between 50 and 500 N, for simple measurements. BFG covers 10 to 2500 N, and VFG adds a 5-inch touchscreen and resistance to harsh environments. Send us the maximum force and whether you need to save results, so that we can recommend the model.

Do you supply Mecmesin instruments in Romania and how long does it take?

Yes, to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer, especially for universal machines with extensometers or chambers. The exact lead time is confirmed in the quotation.

How do you check whether a new force gauge fits an existing Mecmesin stand?

We start from the stand's model and series, the capacity required and the force gauge's mounting type. The MDD and LCP/S stands can be combined with Mecmesin digital force gauges, and compatibility is confirmed after comparing these data; a photo of the nameplate helps.

What do I need to send for a quotation on a torque tool tester?

Send the torque range of the wrenches or screwdrivers being checked (for example 0.2–2 or 5–50 N·m), the type of tools, manual or electric, and whether you need certificates per ISO 6789. TTT-300 has five models, so the range decides the model.

How do I request a Mecmesin quotation?

Send the Mecmesin code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Mecmesin (manufacturer documentation)