Polytec supplier in Romania
Laser Doppler vibrometers and laser velocimeters
Founded in 1967 · Headquarters: Waldbronn, Germany
Who is Polytec and what does it make?
Polytec GmbH, based in Waldbronn, Germany, has existed since 1967 and develops optical measurement technology for research and industry. The main line is laser Doppler vibrometry: measuring the vibrations of a structure without contact, with a laser beam, so with no mass added to the part. Alongside this, the company makes laser velocimeters for length and speed (ProSpeed LSV-1100 and LSV-2100), profilometers for surface metrology and NIR spectrometers for process analysis. It has subsidiaries in the USA, England, France, Japan, Singapore and China and more than 400 employees.
The vibrometer range starts with point systems. VibroFlex is a modular system with the Connect+ base unit and six sensor heads, for optical vibration analysis up to 32 MHz, from microstructures to large objects measured from a distance. VibroGo is a portable, battery-powered vibrometer for condition monitoring of machinery in the field, while IVS-500 is an industrial vibration sensor, for quick contactless inspections and pass/fail tests up to 100 kHz, which can be integrated into high-speed lines. QTec technology with multi-path interferometry improves the signal-to-noise ratio by 20 dB, which helps on dark, moving or distant surfaces.
For full-surface measurements there is the VibroScan family, and for special cases HSV-100 (displacements up to 250 kHz) and RLV-5500 (rotational vibrations up to 10 kHz, on shafts, gas turbines and generators). In Romania the range suits university laboratories, development departments in the automotive industry and those who validate finite element models, besides manufacturers who carry out end-of-line quality control.
What do we supply from the Polytec range?
| Product | Description |
|---|---|
| VibroFlex | Modular system of point vibrometers: the Connect+ unit and six sensor heads, bandwidth up to 32 MHz. Microscope objectives for tiny structures or measurement of large objects from a distance; the variants include TriMount (3D measurement) and Range, for distances of more than 500 m. |
| VibroGo | Portable, battery-powered laser vibrometer for condition monitoring in the field. It is a stand-alone instrument, with optics and data processing in a single housing, dedicated to checks on machinery. |
| VibroScan QTec | Line of full-field vibrometers, which measure vibrations over a surface without contact. VibroScan QTec Xtra uses a near-infrared laser (SWIR), and Xtra 3D measures vibrations in three axes. They are turnkey systems, with sensor head, data acquisition and analysis software. |
| HSV-100 and RLV-5500 | HSV-100 analyses displacements up to 250 kHz and vibration velocities up to 40 m/s simultaneously, for timing drive dynamics. RLV-5500 measures the angular velocity and angular displacement of rotational vibrations up to 10 kHz, on any shape of rotating element. |
Why Polytec?
- Contactless measurement — vibration is read with the laser, so the part receives no extra mass and hot, rotating or fragile surfaces can be measured
- VibroFlex modular system — the same Connect+ base unit with six heads, from a microscope for MEMS to measurement at more than 500 m with VibroFlex Range
- QTec technology — multi-path interferometry, with a signal-to-noise ratio improved by 20 dB, useful on dark or biological surfaces
- Special vibrometers — HSV-100 for timing drive dynamics, RLV-5500 for rotational vibrations on shafts and turbines
- A range from portable point vibrometers to full-field systems — the same laser technique for the field, the laboratory and the end of the line
Which Polytec codes and series are requested most often?
| Code | Description |
|---|---|
| VibroFlex Connect+ | Base unit for VibroFlex sensor heads |
| VibroFlex TriMount | Modular setup for 3D measurement, up to 24 MHz |
| VibroFlex Range | Vibrometer for distances of more than 500 m |
| VibroFlex QTec | Sensor head with high optical sensitivity |
| VibroGo | Portable battery-powered laser vibrometer |
| IVS-500 | Industrial vibration sensor, up to 100 kHz |
| VibroScan QTec Xtra | Full-field vibrometer, SWIR laser |
| VibroScan QTec Xtra 3D | Triaxial full-field variant |
| HSV-100 | High-speed vibrometer, 250 kHz |
| RLV-5500 | Vibrometer for rotational vibrations, 10 kHz |
| ProSpeed LSV-1100 | Laser velocimeter |
| ProSpeed LSV-2100 | Laser velocimeter |
| MSA IRIS | Measurement service and microscope line |
Where is Polytec equipment used?
- Automotive industry — NVH, timing drive dynamics, validation of finite element models
- MEMS and electronics manufacturers — vibration analysis of microstructures
- Aerospace and turbines — rotational vibrations and bench tests
- End-of-line quality control — vibration inspection of serial products
- University research — acoustics, structural dynamics, non-destructive testing
How do we supply Polytec in Romania?
We can quote Polytec vibrometers from the VibroFlex, VibroGo and VibroScan series, as well as velocimeters and accessories, as systems supplied to order. Most are configured equipment: the lead time to order is usually 1–4 weeks for accessories and components, and for complete systems it can be longer, being confirmed in the quotation. For a useful request describe the object to be measured (size, surface, distance), the frequency band, whether you want point, 3D or full-field measurement, and the working environment. An exact model is chosen from the measurement details, not from the name of the application alone.
The offer covers Polytec equipment; the configuration of a complete system depends on the application.
Frequently asked questions about Polytec
What does Polytec make?
Polytec, from Waldbronn, makes laser Doppler vibrometers (point, full-field and microscope-based), ProSpeed laser velocimeters, profilometers for surface metrology, photonics technology and NIR spectrometers for processes. The company has existed since 1967 and has subsidiaries in the USA, England, France, Japan, Singapore and China.
How do I choose between a point vibrometer and a full-field one?
The point one (VibroFlex, VibroGo) measures vibration at one point, over a wide band, up to 32 MHz on VibroFlex. The full-field one (VibroScan) produces a map of the vibration over a surface. We need the size of the part, the frequency band and whether the mode shape is of interest.
Can you supply Polytec equipment in Romania, and within what lead time?
Yes, supplied to order, usually 1–4 weeks for components and accessories; complete configured systems can have a longer lead time, which we specify in the quotation, after the configuration is confirmed.
Can I replace an older Polytec vibrometer with a current model?
We establish equivalences after checking. Send us the name from the control unit and from the optical head, the approximate year of manufacture and the software used; we ask the manufacturer which current model fits.
What data do you need for a vibrometer quotation?
The type of part and the material, the measurement distance, the surface (dark, glossy, rotating), the frequency band and the amplitude expected, plus whether the measurement is for the laboratory or industrial. From these data the choice is made between VibroFlex, VibroGo, VibroScan or the special models.
How do I request a Polytec quotation?
Send the Polytec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Polytec GmbH (manufacturer documentation)

