Pacific Power Source supplier in Romania
programmable AC/DC sources, grid simulators, electronic loads, EMC test systems
Founded in 1971 · Headquarters: Irvine, California, USA
Who is Pacific Power Source and what does it make?
Pacific Power Source is an American manufacturer of programmable AC/DC power sources, grid simulators and electronic loads, based in Irvine, California, active since 1971. The range covers AC and AC/DC sources from a few hundred VA to over 1 MVA, electrical grid simulators for testing inverters and grid-connected equipment, regenerative electronic loads and systems dedicated to electromagnetic compatibility testing. From the Pacific Power Source portfolio we can quote both compact laboratory sources and high-power systems for testing photovoltaic inverters or grid equipment.
What sets Pacific Power Source apart is its very wide power coverage, from hundreds of VA to over 1 MVA: the AZX series starts from 30 kVA and reaches over 1.1 MVA with a hardware-in-the-loop simulation (PHIL) function, useful for testing renewable energy systems at full scale. The LSX and LMX series cover smaller, laboratory needs, with output frequencies of up to 1,200 Hz on the LSX and 5,000 Hz on the LMX for aerospace equipment with non-standard power supply. The RGS and GSZ grid simulators reproduce real disturbances for certifying inverters to IEEE 1547.1 or UL 1741 SB, and the RLS and ELZ loads recover the dissipated energy instead of wasting it.
For the Romanian market, Pacific Power Source makes sense for research laboratories, technical universities and manufacturers of electrical or electronic equipment that must test products at voltages, frequencies or grid disturbances different from the local ones.
What do we supply from the Pacific Power Source range?
| Product | Description |
|---|---|
| AZX / AGX / AFX / ADF programmable AC/DC sources | Programmable power sources for laboratory or production testing, from 6 kVA (AGX, AFX) to over 1.1 MVA for the AZX version, with combined AC and DC output. The AZX adds a PHIL function for hardware-in-the-loop simulation of the electrical grid, useful for testing renewable energy equipment at full scale. The ADF covers the 45-500 Hz frequency range for equipment with special requirements. The customer specifies the power required, the voltage and frequency range and whether a PHIL function is needed. |
| LSX / LMX / MS compact laboratory sources | The LSX (1.5-6 kVA) and LMX (500 VA-30 kVA in parallel) are linear or PWM laboratory sources, with output frequencies of up to 5,000 Hz on the LMX, useful for testing aerospace or military equipment. The MS series covers larger-scale power conversion, from 62.5 kVA to 625 kVA, for industrial applications. Typical application: testing electronic equipment at voltages and frequencies different from the local grid, including 400 Hz for aviation. |
| RGS / GSZ / RLS / ELZ grid simulators and electronic loads | The RGS and GSZ simulate real electrical grid disturbances (voltage and frequency variations, harmonics) for testing photovoltaic inverters or grid-connected equipment, at powers from 12 kVA to over 1.1 MVA. The RLS and ELZ are regenerative electronic loads that recover the energy dissipated during the test, at similar powers. Typical application: certifying solar inverters or electric vehicle chargers to grid standards. |
Why Pacific Power Source?
- AC/DC sources covering from hundreds of VA to over 1 MVA, in several series
- Grid simulators for certifying inverters to IEEE 1547.1 and UL 1741 SB
- Regenerative electronic loads, which recover the dissipated energy instead of wasting it
- Output frequencies of up to 5,000 Hz, useful for aerospace equipment with non-standard power supply
- More than five decades of manufacturing programmable sources, with product ranges reaching over 1 MVA
Which Pacific Power Source codes and series are requested most often?
| Code | Description |
|---|---|
| AZX | Regenerative AC/DC source with PHIL function, up to 1.1 MVA |
| AGX | Regenerative AC/DC source, 6 kVA-1.296 MVA |
| AFX | Programmable AC/DC source, 6-180 kVA |
| ADF | Programmable AC source, frequency range 45-500 Hz |
| LSX | Low-power PWM AC source, 1.5-6 kVA |
| LMX | Linear AC source, frequency up to 5,000 Hz |
| MS | AC power converter, 62.5-625 kVA |
| RGS | Regenerative grid simulator, up to 1.296 MVA |
| GSZ | Grid simulator with PHIL function |
| RLS | Regenerative AC/DC load, up to 1.296 MVA |
| ELZ | Regenerative electronic load with PHIL function |
| SmartTS-HFI | Harmonics, flicker and immunity test system |
| EPTS | Electronic power transfer switch for testing |
| SmartTS PV | Photovoltaic inverter test system IEEE 1547.1 |
Where is Pacific Power Source equipment used?
- Renewable energy — testing solar and wind inverters to grid standards
- Electric vehicles — testing chargers and traction systems
- Aerospace and defence — power supply at non-standard frequencies for on-board equipment
- Data centres — testing uninterruptible power supplies
- Research and academia — laboratory sources for development and validation
How do we supply Pacific Power Source in Romania?
For Pacific Power Source we rely on the manufacturer's datasheets; availability is confirmed in the quotation. We supply Pacific Power Source sources and systems to order, usually in 1–4 weeks for standard configurations and longer for high-power systems. For a quotation, the customer should send the desired series (for example AFX or LMX), the power required and the test voltage and frequency range. This range is supplied to order; each system is configured for the customer's application.
Lead times for very high-power systems (over 1 MVA) are set from the specification, and installation and on-site commissioning remain the responsibility of the customer or an integrator.
Frequently asked questions about Pacific Power Source
What products does Pacific Power Source make?
Pacific Power Source makes programmable AC/DC power sources, electrical grid simulators, regenerative electronic loads and EMC test systems, from a few hundred VA to over 1 MVA. The company is based in Irvine, California, and has been active since 1971.
How do I choose a Pacific Power Source for a research laboratory?
For low laboratory powers, the LSX or LMX cover up to a few kVA with extended output frequencies; for large-scale system tests, the AFX or AZX series reach hundreds of kVA or over 1 MVA. The choice depends on the power required and on whether the test calls for a hardware-in-the-loop simulation function.
What does Pacific Power Source have for certifying solar inverters?
The SmartTS PV is the system dedicated to testing photovoltaic inverters to IEEE 1547.1 and UL 1741 SB, and the RGS or GSZ grid simulators complete the test with real electrical grid disturbances.
How quickly do you supply Pacific Power Source equipment in Romania?
We supply Pacific Power Source sources to order, usually in 1–4 weeks for standard configurations; very high-power systems may need an additional lead time, confirmed directly by the manufacturer.
How do I request a Pacific Power Source quotation?
Send the Pacific Power Source code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Pacific Power Source, Inc. (manufacturer documentation)

